License Plate Lamp; Fluid Capacities - Chrysler 2016 200 Owner's Manual

5. Rotate the stop/rear turn signal lamp socket 1/4 turn
counterclockwise and remove it from the tail lamp
housing.
6. Remove the bulb from the socket and install the
replacement bulb.
7. Install the bulb socket into the tail lamp housing and
rotate the bulb socket ¼ turn clockwise to lock it in
place.
8. Install the tail lamp housing.

FLUID CAPACITIES

Fuel (Approximate)
2.4L and 3.6L Engines
Engine Oil With Filter
2.4 Liter Engine (SAE 0W-20, API Certified)
MAINTAINING YOUR VEHICLE 649
9. Install the tail lamp housing beauty cover.

License Plate Lamp

1. Remove the screw of the license plate lamp assembly
and pull down on the license plate lamp assembly to
remove.
2. Remove the bulb from the socket and install the
replacement bulb.
3. Install the license plate lamp assembly.
U.S. Metric
15.8 Gallons 60 Liters
5.5 Quarts 5.2 Liters
7