Stop/Rear Turn Signal Lamp - Chrysler 2016 200 Owner's Manual

NOTE: Passenger side is shown. The driver's side is
similar.
Backup Lamp Socket
5. Rotate the backup lamp socket counter clockwise 1/4
turn to remove the backup lamp socket from the trunk
lid lamp housing.
MAINTAINING YOUR VEHICLE 647
6. Remove the bulb from the socket and install the
replacement bulb.
7. Install the backup lamp socket into the trunk lid lamp
housing.
8. Rotate backup lamp socket clockwise 1/4 turn to lock
it into place.
9. Reposition the inner deck panel and secure with a
push pin if removed.
10. Install the access cover.

Stop/Rear Turn Signal Lamp

1. Open the trunk lid.
2. Remove the tail lamp housing beauty cover by grasp-
ing the top edge and pulling rearward to expose the
tail lamp housing bolts.
7