Light Kit Assembly-Fp8016Ob Only - Fanimation FP8012 series Owner's Manual

Light Kit Assembly—FP8016** ONLY
1. Install included minican bulb into the socket.
(Figure 23)
CAUTION
Bulb is pressurized and may shatter. DO NOT TOUCH
BULB WITH BARE HANDS. Fingerprints may result in
shorter bulb life. Remove fingerprints with alcohol
prior to use.
To reduce the risk of fire, use 100-watt max. type
T4-minican JD E11 tungsten halogen bulb. Turn off the
wall switch and allow the bulb to cool for 10 minutes
before relamping.
2. Loosen the three thumb screws provided on the rim
of the light kit so the lip of the glass can be raised up into
the light kit. (Figure 24)
3. Install pull chains and fobs. (Figure 25)
10
Figure 23
Figure 24
Figure 25