Schwinn HYBRID BICYCLE Owner's Manual page 46

4 Adjustments
Align the Handlebar (with threadless stem)
❶ Stand in front of the handlebar and hold the front wheel
between your legs.
❷ Using a 6 mm Allen wrench, loosen the pinch binder bolts
and move the handlebar left or right until it is aligned with
the front wheel. Figure 4.32
❸ Tighten the stem binder bolt and check the handlebar is
securely attached and cannot move.
Pinch binder
2
bolts
44
Adjust the Handlebar Angle (all stem types)
❶ Using a 6 mm Allen wrench loosen the handlebar binder
bolt(s). Figure 4.33
❷ Rotate the handlebar into the desired position.
❸ Check that the handlebar is centered to the frame and front
wheel. Sit on the seat and check your reach to grips, shifters
and brakes. Refer to Section 1, Fig. 1.2: Seat Height and
Handlebar Reach for guidelines.
Move the
❹ Tighten the handlebar binder bolt(s) and check the
handlebar left
handlebar is securely attached and cannot move.
or right until
it is aligned
with the front
wheel
Figure 4.32
2
1
Loosen handlebar
binder bolt(s)
Figure 4.33