Table of Contents
Advertisement
- 4 Place P Carriage
(without
P Presser)
on the right
side
of
Needle Bed
(refer to
page 60).
Move P Carriage to the left
and
back
again so that
stitches
are removed
and the needles
align
in
B
position again.
-
5 Set Cam Lever to "S"
(SLIP) and knit 3 rows
with
waste yarn.
- 6 Place P Carriage
on
the left
side of Ribber Needle
Bed
(refer
to page 60),
and slide it to the right to
push up needles
to
C position.
-
7 Exchange
waste yarn
for
main yarn in Yarn Feeder
and
knit from the
left to the
right.
- 8 Slide P Carriage on Ribber
from the
left
to the
right.
-
9
Knit from
the
right
to
the
left.
-10 Push both
end
needles
on
Knitter
to
A
position.
8-
1 Slide P Carriage on Ribber from the left to the
right to push up needles to C position.
- 2 Set the Pattern Card and push 0 FF the Inspection
Button. Knit 1 row from left to right.
(On Ribber, all the needles
inC
position
knit,
and
on Knitter, only selected needles
knit.)
- 3 Push
up
Ribber needles to C position using P Car-
riage.
- 4 Knit one row from the
right
to the left.
- 5 Remove stitches on Knitter using P Carriage.
Then
knit
1 row from left to right.
Repeat8-3
-
8-5
for main knitting.
Suspend Hanger Combs
with Weights after
1 0
rows and
advance them every
10
rows
upwards.
M-ESH KNITTING
Mesh-like
knitting is worked in the same manner as done
for drive lace
knitting
using
thin yarn.
The
sample
is
knitted
with
Pattern
No.13-(41).
When steaming, slide the iron in the direction of wale of
the fabric.
-
82
-
Hide quick links:
Advertisement
Chapters
Table of Contents
