Singer 560 Operation Manual page 69

••• •
•••
•••••••••••••••••
••••••••••••••••••
•• •
••
I - -
ll
0
Ill--
=
0 - 2 Arrange needles for knitting the initial row.
1. Arrange needles of both beds for east-on.
(1) On both of Knitter and Ribber Beds, push 25 needles
on each side of centre(O) up to D position.
(2) Move Carriage 2-3 times carefully across needles in
D position and leave it at right side.
(Needles in D position will be aligned in B position
on both beds.)
2. Thread yarn into Yarn Feeder.
- 65 -
(1) After threading yarn through Auto-Tension, make a
loop at the end of yarn and hold it at the left side
of both beds.
(2) Insert Hook Tool "A" from underneath, catch yarn
end, and pull it down .
(3) Hold yarn end and tie it around Clamp screw.