Table of Contents
Advertisement
InsTallaTIon
SECTIONS
Table of Contents
step 4 – Check the Connection and secure uCu
Check the status bar to make sure a connection is established.
There are several status options:
• Not Connected – UCU is not communicating with Advanced
Secure USB Switch
• Connected/Access Granted – UCU is communicating with
Advanced Secure USB Switch
Belkin
®
Advanced Secure USB Switch User Manual
1
2
3
step 5 – Create usb device rules
Once the Advanced Secure USB Switch is powered up and connected
to the UCU, create your first rule.
The mechanisms to create white list and black list rules are very similar
and can be done in two ways:
Method 1: read attributes from usb device
You can read the attributes of a connected USB device to create the
white list and black list rules.
16
4
5
1. Connect the USB device to the "USB Device" jack at the back of
the Advanced Secure USB Switch.
2. In SCT, select device > read.
The USB device attributes will appear in the Currently Connected
Device pane.
3. Right-click attributes and select from the drop-down list if you
want to add to the white list or black list.
4. Repeat the above steps for every USB device.
6
7
baCK To Table of ConTenTs >
Advertisement
Table of Contents
