Toyota 1986 Landcuiser Repair Manual page 465

o
27.3mml1.075 in.J 10''''
BODY - Rear Door
B023
REPLACEMENT OF GLASS
1.
REMOVE GLASS CHANNEL WITH SCREWDRIVER OR
SUCH
2. APPLY SOAPY WATER TO INSIDE OF WEATHER·
STRIP
3. TAP ON CHANNEL WITH PLASTIC HAMMER
ASSEMBLY OF REAR OOOR
1.
BEFORE INSTALLING PARTS. APPLY MP GREASE TO
THEM
(a) A pply MP grease to the sliding su rface. gear of the
window regulator.
(b) A pply MP grease to the sliding surface of the door
lock.
2. INSTALL OUTSIDE HANDLE
~ ~ (
Install the outside handle with two boll$.
3 INSTALL DOOR LOCK
~
I .'
~~ , _ .
(('b', (w! door lock solenoid)
Connect the connector to the solenoid.
(w/ door lock solenoid)
Install the door lock w ith th ree screws and bolt.
(w/ o door lock solenoid)
Install the door lock with th ree screws.
4. INSTALL WINDOW REGULATOR
(a) (w/ power window)
Connect the connector to the motor.
(b) (w/ power window)
lnstalt the regulator with four bolts.
(w/ o power window)
Install the regulator with three bolts.
5. INSTALL QUARTER WINDOW
6. INSTALL DOOR GLASS
Install the door glass to the regulator roller.