Table of Contents
Advertisement
User manual
1.1 Function Introduction
I Alarm mode: w ith PSTN and GSM network al arm, GSM networ k with
GPRS function(GPRS function is for China market only), remote arm and
disarm panel through CMS or SMS CID protocol, SMS notification, the
priority of PSTN and GSM network is Optional.
2
With a new large-screen, full-touch buttons, LCD graphic display steps,
work status,Alarm process easy and intuitive.
3
The full English voice prompting operation: all local or remote operation,
alarm information, event log view.
4
GSM-hook and voice telephone with intercom function.
5 All alarm information can be programmed for the following settings:
0 does not send any information
1,Send only SMS
5 ,CMS + SMS.
6 Sleep mode: Under sleep mode, all the lights, backlight, voice and
remind tone are disabled.
7 Alarm panel under idle status is equivalent to a cellphone, you can call
through the GSM network for balance inquiries
8 The associated zone: 4 groups associated zone, three kinds of
association patterns, can effectively reduce false alarm or for other
functions.
9 PGM output: With a programmed output port, followed by five kinds of
alarm events output.
10 The doorbell Audio Optional:
1. Ding Dong
11 Remote phone operation: dialing by telephone offsite, after password
verification, you can arm, disarm, listen-in premise, system status query
and electrical switches controls and other operations.
12 Voice Alarm: When panel alarm, it will automatically dial the preset user
phone numbers to report alarm information then you can remote control
the panel after enter user passwords.
Chapter I Introduction
2,Only call users
6,CMS + call user
2 Welcome
3,SMS + call user 4, CMS only
7. CMS + SMS + call user
3. Recording
4. Dee-Dee~
1
Hide quick links:
Advertisement
Table of Contents
