Set Detector Loss Inspection; Set Arm/Disarm Tone - Focus ST-IIIB User Manual

User manual
Press[*] for 3 seconds
*
Enter password.... Please enter ring
times, if set as 0, the phone will not
off hook, press confirm key to save,
press back key to exit
Enter 2 digit number from 0-15, add 0 if lower than 10.
Note: The max. Ring times as per the local communication, if set 0, not
off-hook.

6.4.6 Set detector loss inspection

The alarm panel will inspect the detectors
interval, if not receive, it is determined that the detector is loss, the general
setting is not less than 6 hours( the default setting is 0, disable this function)
For example: Set detector loss inspection time is 8 hours.
Press[*] for 3 seconds
*
Please enter 0 to 99 hours detector
loss inspection time, 0 for disable,
press confirm key to save, press
back key to exit

6.4.7 Set arm/disarm tone

When user arm/disarm the system through remote control, if siren will sound
or not for prompting.( the default setting is disabled)
For example: Set siren with short sound when arm/disarm through remote control.
Press[*] for 3 seconds
*
Please choose arm/disarm
tone: 1. siren short sound
2. no voice, press confirm
key to save, press back key
to exit
Enter password
Enter password
Enter password
0 1 2 3 4
status or alarm info in this time
0 1 2 3 4
0 1 2 3 4
1
5
# 4 #
0 5 #
5 4 #
#
0 8 #
5 # 4 #
#
5 #
6 #
7 #
19