Delete System Events; Restore To Factory Default; Set Gsm Module - Focus ST-IIIB User Manual

User manual
For example: Set as password control output
Press[*] for 3 seconds
Enter password
*
Please select programmable output port follow event
1.Follow alarm output 2.Follow arm output
3.Follow AC power fault output
4.Follow Communication fault output
5.Password control output
Hint: when setting as password control output, press key 5 for 3 seconds,
then enter the user password, the programme output port will be open
or closed. Voice phone or SMS also can open or close the outport.

6.7.5.Delete system events

Press[*] for 3 seconds
Enter password
*
Please re-confirm to restore
to factory default.
Press confirm key to save,
press back key to exit.

6.7.6.Restore to factory default

Press * for 3 seconds
Enter password
*
Please re-confirm to restore
to factory default.
Press confirm key to save,
press back key to exit.

6.8. Set GSM module

Press[*] for 3 seconds
0 1
*
For example: Set enable GSM module, telephone line priority, Set GSM bill
32
0
0
0
2 3 4 5 #
reminder time is 21st Dec. 2012.
1 2 3 4 5
3 5
1 2 4
#
1 3 4 5
2
#
The voice prompt will instruct you
8 #
to proceed below operations.
# 7 # 4 #
5 #
7 #
#
# 7 # 6 #
5 #