Set Voice Phone - Focus ST-IIIB User Manual

User manual
Note: 1.The user code is the identification code in CMS setting, CMS 1 and CMS
2 use the same user code; dialing times can be set 1-15 , communication
inspection interval time can be set 0-999 hours, the common setting is
24 hours.
2.When set phone number, long press 1, display the letter P, means pause
1 second when dialing, when the telephone line which connect to the
alarm panel is sub-line, need a pause dialing.
3.For GSM, just recognize the number behind P, can make sure telephone
and GSM dial the same number.
For example: the sub-line connect to alarm panel, CMS number is 80808080,
in this way, set CMS number like this 9P80808080, 9 is out code.
Press[*] for 3 seconds
*
Please enter phone number,
press * key to delete, Long
press 1, dialing pause 1
second, press confirm key to
save, press back key to exit.

6.3 Set voice phone

Press[*] for 3 seconds
*
[1] Set
voice phone 1
1
#
number, press * key to delete,
Long press 1, dialing pause 1
second, press confirm key to
save, press back key to exit.
16
Enter password
0 1 2 3 4
[2] Set
voice phone 2
voice phone 3
2 #
Please enter phone
X X X #
The setting
is saved
0 1 3 4
2
9 1 8 0 8 0 8 0
Press[1] key for 3 seconds.
5 # 3 #
Set voice phone
[3] Set
[4] Set
voice phone 4
3 # 4 #
Please enter dialing
times, press confirm
key to save, press back
key to exit.
X
5 # 2 #
Then operate according to
the voice prompt as below:
[5] Set voice phone dialing times
[5] Set
voice phone
dialing times
5 #
X X # X
The setting
is saved
1 #
8 0 #
[6] Set voice
phone password
inspection
6 #
1.Enable
2.Disable
X X #
The setting
is saved