System Maintance - Focus ST-IIIB User Manual

User manual
2>EXIT-ENTRANCE single trigger model: trigger zone 1, zone 1 make alarm.
Trigger zone 2 first, then during the period of related time trigger zone 1,
do not make alarm. Trigger zone 2, then do not trigger zone 1 during related
time, then zone 2 make alarm.
3> Dual trigger alarm mode: trigger zone 1 or zone 2 only do not make alarm.
During related time trigger zone 1 or zone 2, then zone 1 or zone 2 make alarm.
Example: set zone 5 and zone 9 as greep #4 dual trigger mode related zone,
related time is 120sec.
Press[*] for 3 seconds
*
Eneter correlate group
# , press confirm key to
confirm or press back key
to exit setting.
0 5
Setting is saved, press set relate time from
2 to 255sec, and press confirm key to save
setting, or press back key to exit setting
Setting is saved, pls choose relate mode. 0
disable relate mode , 1 entrance-exit dual
trigger mode, 2 entrance-exit single trigger
mode, 3 dual trigger mode. Press confirm
key to save setting or press back key to exit.
NOTE: max set 4 group relate zone

6.7 system maintance

Press[*] for 3 seconds
0 1
*
30
Enter password
Settingsaved, enter second related
#
zone #, press confirm key to save
setting or press back key to exit setting
5
2 3 4
0 1 3 4
2
4 #
press confirm key to savesetting,
or press back key to exit setting.
# 7 #
5 # 6 #
Enter the firstcorrelate zone #
0
1 2 0
3 #
1
Set timing arm /disarm
2
Recording
3
Play recoreding
4
Set programmable output port
5
Delete system log
6
Restore to factory default
5 #
9 #
#