Omega OMB-DAQBOARD-3000 Series User Manual page 89

Appendix A
With 68-Pin SCSI Adaptability for Analog I/O, Digital I/O, & Pulse/Frequency
Overview ...... 1
Block Diagram ...... 2
Connection Tips...... 3
System Examples ...... 4
Using the Screw-Terminal Blocks ...... 5
Adding RC Filter Networks ...... 11
Specifications ...... 13
The DBK215 module is compatible with:
• DaqBoard/500 Series • DaqBoard/3000 Series
Overview
The DBK215 module includes:
BNC Access to 16 inputs or outputs (on front panel)
o
o on-board screw-terminal blocks*
on-board socket locations for custom RC Filter networks*
o
68-pin SCSI connector (on rear panel)
o
* The top cover plate must be removed to access the terminal blocks and
DBK215's SCSI connector (P5) connects to a second 68-pin SCSI connector on a DaqBoard/500 Series,
or DaqBoard/3000 Series board. Connection is made via a CA-G55, CA-G56, or CA-G56-6 cable.
Cable descriptions are provided on page A-2.
The DBK215 provides BNC and screw-terminal access to all analog and digital I/O from the host data
acquisition device. Related to the screw-terminals is a front panel slot for routing all I/O wiring.
Appendix A
DBK215 16-Connector BNC Connection Module
DBK215 Rear Panel
Includes a 68-pin SCSI connector designated as P5.
the RC filter network section of the board.
Reference Note:
DBK215 is intended for DaqBoard/500 Series and DaqBoard/3000 Series applications.
Refer to the associated documentation as needed. For information concerning similar16
channel BNC connectivity/interface boards, designed for use with other products, refer to the
DBK213 and DBK214 sections of the DBK Options manual (p/n 457-0905).
948894
DBK215 Front Panel
Upper Slot for Terminal Board Wiring Pass-Through
Lower section of 16 BNC Connectors
DBK215 A-1