Omega OMB-DAQBOARD-3000 Series User Manual page 34

System Example
A DaqBoard/3000 Series system example which includes both a PDQ30 and a DBK215 is illustrated on
page 2-4. For convenience, it has been repeated below. In regard to the PDQ30 aspect:
1) Connection from PDQ30 to DaqBoard/3000 is made via a CA-266-3 (or CA-266-6) HDMI cable.
2) PDQ30's analog input lines connect via removable screw-terminal blocks (TB1 through TB6).
3) A pinout for PDQ30 follows shortly.
4) Users of DBK215 should refer to Appendix A.
Instead of connecting a DBK215 to the DaqBoard/3000 series 68-pin SCSI connector, a TB-100
5)
terminal board option can be connected. The TB-100 option is discussed on page 2-3.
*Note: The DBK215 offers screw terminal connections and BNC connections in an enclosure. If BNC connectors and an
enclosure are not needed, a TB-100 Terminal Connector option can be connected to the 68-pin SCSI connector instead
of the DBK215. See page 2-3 for TB-100 information. Refer to Appendix A for DBK215
information.
2-6 Connections & Pinouts
DaqBoard/3000 Connected to a PDQ30 and to a DBK215*
918494
DaqBoard/3000 Series User's Manual