Zoom G3 Operation Manual page 5

STORE/SWAP key
GLOBAL key
USB connector
CONTROL IN jack
FP01/FP02
PAGE keys
Parameter knobs 1-3
Foot switches 1-3
POWER (eco) switch
DC9V AC adapter jack
ZOOM AC adapter (AD-16)
FS01
ACTIVE/PASSIVE switch
Use this switch to set the
Set this to "ACTIVE" (pushed in) if you have an effect pedal
connected between your instrument and the
directly connecting a guitar with active pickups.
Set this to "PASSIVE" (not pushed in) if you are directly
connecting a guitar with passive pickups.
PRE/POST switch
Use this switch to set the point when
the signal is output from the BALANCED
OUT connector.
Set it to "POST" (pushed in) to output the
signal after the
(not pushed in) to output the signal before
the effects.
GROUND switch
Use this switch to connect or disconnect the
BALANCED OUT connector with the ground.
Set it to "LIFT" (pushed in) to separate the signal
path from the grounding pin. Set it to "CONNECT"
(not pushed in) to connect it to the grounding pin.
Computer
INPUT impedance.
or you are
effects. Set it to "PRE"
5