Zoom G3 Operation Manual page 44

Effect Types and Parameters
077 Delay
078 TapeEcho
079 ModDelay This delay effect allows the use of modulation.
080 AnalogDly
081 ReverseDL This reverse delay is a long delay with a maximum length of 2500 mS.
082 MultiTapD This effect produces several delay sounds with different delay times.
083 DynaDelay
44
This long delay has a maximum length of 5000 mS.
Knob1
Time 1–5000
Page01
Sets the delay time.
HiDMP 0–10
Page02
Adjusts the treble attenuation of the
delay sound.
This effect simulates a tape echo. Changing the "Time" parameter
changes the pitch of the echoes.
Knob1
Time 1–2000
Page01
Sets the delay time.
HiDMP 0–10
Page02
Adjusts the treble attenuation of the
delay sound.
Knob1
Time 1–2000
Page01
Sets the delay time.
Rate 1–50
Page02
Sets the speed of the modulation.
This analog delay simulation has a long delay with a maximum
length of 5000 mS.
Knob1
Time 1–5000
Page01
Sets the delay time.
HiDMP 0–10
Page02
Adjusts the treble attenuation of the
delay sound.
Knob1
Time 10–2500
Page01
Sets the delay time.
HiDMP 0–10
Page02
Adjusts the treble attenuation of the
delay sound.
Knob1
Time 1–3000
Page01
Sets the delay time.
Tone 0–10
Page02
Adjusts the tone.
This dynamic delay adjusts the volume of the effect sound
according to the input signal level.
Knob1
Time 1–2000
Page01
Sets the delay time.
F .B 0–100
Page02
Adjusts the feedback amount.
Knob2
F .B 0–100
Adjusts the feedback amount.
P-P MONO, P-P
Sets delay output to mono or ping-
pong.
Knob2
P F .B 0–100
Adjusts the feedback amount.
Level 0–150
Adjusts the output level.
Knob2
F .B 0–100
Adjusts the feedback amount.
P Level 0–150
Adjusts the output level.
Knob2
F .B 0–100
Adjusts the feedback amount.
P-P MONO, P-P
Sets delay output to mono or ping-
pong.
Knob2
F .B 0–100
Adjusts the feedback amount.
Level 0–150
Adjusts the output level.
Knob2
PTTRN 1–8
Sets the tap pattern, which varies from
rhythmical to random patterns.
Level 0–150
Adjusts the output level.
Knob2
Sense -10–-1, 1–10
Adjusts the effect sensitivity.
Level 0–150
Adjusts the output level.
FS Hold, InputMute
Knob3
Mix 0–100 P
Adjusts the amount of effected sound
that is mixed with the original sound.
Level 0–150
Adjusts the output level.
FS InputMute
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
FS InputMute
Knob3
Mix 0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Hold, InputMute
FS
Knob3
Mix 0–100 P
Adjusts the amount of effected sound
that is mixed with the original sound.
Level 0–150
Adjusts the output level.
FS Hold, InputMute
Knob3
Bal 0–100 P
Adjusts the balance between original
and effect sounds.
FS InputMute
Knob3
Mix 0–100 P
Adjusts the amount of effected sound
that is mixed with the original sound.
FS InputMute
Knob3
Mix 0–100 P
Adjusts the amount of effected sound
that is mixed with the original sound.