Language; Twindos - Miele WKG 120 Operating Instructions Manual

Language 
The display can be set to appear in
one of several different languages.
The flag  after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The selected language will be stored in
memory.

TwinDos

You can set the type and amount of
detergent and also start a cleaning
programme for the TwinDos system.
Detergent/amount
The washing machine is pre-set as
standard for UltraPhase 1 and
UltraPhase 2 for hardness range II ().
The settings must be changed in the
electronics:
– for water hardness range I () and
water hardness range II ().
– when changing to a different deter-
gent or fabric conditioner. The
TwinDos containers (optional ac-
cessories) are required for this.
Dosage amounts for UltraPhase 1 and
UltraPhase 2
UltraPhase 1
UltraPhase 2
Adjusting the dosage amount
Detergent / amount
 Touch the OK sensor.
Compartment 1
 Touch the OK sensor.
Miele UltraPhase 1
 Touch the OK sensor.
Dosage - C. 1
 Use the  and  sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.

Set dosage for UltraPhase 2
 Confirm the message with the
OK sensor.
Dosage - C. 2
 Use the  and  sensors to adjust
the dosage amount as required and
confirm this value with the OK sensor.
The dosage amount has been adjusted.
Settings
 
48 ml 60 ml 72 ml
36 ml 45 ml 54 ml

60
45



ml
ml
87