Table of Contents
Advertisement
Settings
Low water pressure
If the water pressure is less than 1 bar
(100 kPa) the programme will be can-
celled and the fault message
will appear.
take See
If the on-site water pressure cannot be
increased, activating this function will
prevent the programme from being can-
celled.
Factory default setting: Low water pres-
sure is switched off.
Anti-crease
The anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30 minutes at the end of the
programme. The door can be opened at
any time.
Factory default setting: anti-crease is
switched on.
94
Water in-
Hide quick links:
Advertisement
Table of Contents
