Time And Date - D-Link DSL-2730U User Manual

Section 3 – Web Configuration
any 13 ASCII characters.
 If you choose 128-bit and Hex (26 characters), enter any
26 hexadecimal characters.
Click it to apply the settings temporarily. If you want to save
Apply
the settings of this page permanently, click Save in the lower
Changes
left corner.

Time and Date

Choose SETUP > Time and Date. The page is shown as the figure appears on the
right.
In the Time and Date page, you can configure, update, and maintain the correct
time on the internal system clock. You can set the time zone that you are in and the
network time protocol (NTP) server. You can also configure daylight saving to
automatically adjust the time when needed.
Click Apply Changes to save the settings.
D-Link DSL-2730U User Manual 32