D-Link DSL-2730U User Manual page 23

Section 3 – Web Configuration
Adding a PVC in PPPoE mode, do as follow:

Step 1 Set the Default Route Selection to Auto.
Step 2 Input VPI/VCP value and select Encapsulation mode provided by your
ISP. The VPI/VCP value of the new PVC must be different from the
PVCs which exist in Current ATM VC Table.
Step 3 Set the channel mode to PPPoE.
Step 4 Enter the User name and password of PPPoE account provided by
your ISP.
Step 5 Choose a connection type from the Type drop-down list. There are 3
connection types available: Continuous, Connect On Demand,
Manual.
Continuous: The system automatically keeps dialing for WAN

connection once the connection is off-line.
Connect On Demand: The system automatically dials for WAN

connection once network access request is detected. If no request is
sent from the LAN within the IdleTime, the system automatically
disconnect from the internet. You can set the Idle Time as you need.
Manual: Manually dial to connect the WAN once powering on the

Router.
Step 6 After setting, click Add to add the new PVC in PPPoE mode in Current
ATM VC Table.
D-Link DSL-2730U User Manual 21