Local Network - D-Link DSL-2730U User Manual

Section 3 – Web Configuration
ADSL Settings
Choose SETUP > Internet Setup > ADSL Settings. The page shown in the right
figure appears. In this page, you can select the DSL modulation. Mostly, you
need to remain this factory default settings. The router supports these
modulations: G.Lite, G.Dmt, T1.413, ADSL2, ADSL2+, and AnnexL. The router
negotiates the modulation modes with the DSLAM.
PVC Auto Search
Choose SETUP > Internet Setup > PVC Auto Search. The page shown in the
right figure appears. This page is used to configure PVC auto detect function,
you can add or delete auto-pvc.

Local Network

You can configure the LAN IP address according to the actual application. The preset IP address is 192.168.1.1. You can use the default settings and
DHCP service to manage the IP settings for the private network. The IP address of the device is the base address used for DHCP. To use the device
for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the device. The IP address available in the
DHCP IP address pool changes automatically if you change the IP address of the device.
D-Link DSL-2730U User Manual 25