D-Link DSL-2730U User Manual page 20

Section 3 – Web Configuration
Step 5 Configure the wireless network in this page.
1) Check Enable Your Wireless Network.
2) Set the SSID for your wireless network, you can also keep it as default.
3) Choose to display or hide your wireless network.
 Visible: Your wireless network can be detected.
 Invisible: You wireless network cannot be detected. Wireless clients
needs to enter the SSID and password manually to join this wireless
network.
4) Choose an encryption mode for the wireless network. It is recommended
to choose WPA2-PSK.
5) Enter a new password in WPA2 Pre-Shared Key.
6) After setting, click Next.
D-Link DSL-2730U User Manual 18