1110 Lcd Front Bezel - Lenovo E31-80 Hardware Maintenance Manual

Remove the finger printer broad in the direction shown by arrow
Remove screw 13 and remove LED board in the direction shown by arrow
Step Screw (quantity)
1
M2.0 × 3mm, flat-head, nylok-coated (1)

1110 LCD front bezel

For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 52
• "1020 Battery pack" on page 53
• "1030 Hard disk drive or solid-state hybrid drive" on page 54
• "1040 Memory module" on page 55
• "1050 Wireless-LAN /Bluetooth card" on page 57
• "1060 Thermal fan assembly and Heat Sink assembly" on page 59
• "1070 System board" on page 60
• "1080 Speaker assembly" on page 62
• "1090 LCD unit and DC-in cable" on page 63
• "1100 Audio board, audio board cable, touch pad board cable, finger printer board and LED board"
on page 64
Removal steps of the LCD front bezel
Remove the LCD bezel screw pad
66
Hardware Maintenance Manual
1
, and then remove two screws
12 .
14 .
Color Torque
Black 1.85 +/- 0.15kgf-cm
2
.