1140 LCD front bezel
For access, remove this FRU:
•
"1010 External battery pack" on page 50
•
"1020 Keyboard" on page 50
•
"1030 Optical disk drive" on page 52
•
"1040 Base cover assembly" on page 54
•
"1050 Hard disk drive or solid-state hybrid drive" on page 56
•
"1060 Wireless-LAN /Bluetooth card" on page 57
•
"1080 Upper case" on page 59
•
"1090 Audio board, audio board cable, power board, touch pad board cable, finger printer board,
LED board and ODD switch board" on page 61
•
"1100 System board" on page 64
• "1120 Speaker assembly, docking LED lens and docking bracket" on page 70
• "1130 LCD unit, docking board, docking cable and DC-in cable" on page 71
Removal steps of the LCD front bezel
Remove the covers
1
, and then remove two screws
Step
Screw (quantity)
2
M2.5 × 4mm, flat-headed, nylon-coated (2)
Remove the LCD front bezel in the direction shown by arrow
1150 LCD panel, EDP cable and hinges
For access, remove these FRUs in order:
•
"1010 External battery pack" on page 50
•
"1020 Keyboard" on page 50
•
"1030 Optical disk drive" on page 52
•
"1040 Base cover assembly" on page 54
•
"1050 Hard disk drive or solid-state hybrid drive" on page 56
•
"1060 Wireless-LAN /Bluetooth card" on page 57
74
Hardware Maintenance Manual
2
.
a
a
Color
Silver
3
.
Torque
3.0 +/- 0.3kgf-cm