1010 Base cover assembly
Removal steps of the base cover assembly
1
Remove the screws
and
Step
Screw (quantity)
1
SCREW M2*6mm, flat-head, nylok-coated (6)
SCREW M2*4mm, flat-head, nylok-coated (4)
Applying labels to the base cover assembly:
The new base cover assembly is shipped with a kit containing labels of several kinds. Apply those labels
when you replace the base cover assembly. For the labels that are not shipped with the new base cover
assembly, peel them from the old base cover assembly, and adhere them to the new one.
Note: If the Certificate of Authenticity (COA) label (b) is attached to a replaced part, return the replaced part
to the customer, or provide a letter to the customer stating the original label part number, serial number,
and product key.
The following illustration shows the location of each label on E31-80.
52
Hardware Maintenance Manual
2
that secure the base cover assembly. Remove the base cover assembly
a
a
b
b
a
a
c
a
b
b
Torque
Color
Black
1.85 +/-
0.15kgf-cm
Black
1.85 +/-
0.15kgf-cm
a
PN number
SS10H52675
SS10H54968
3
.