Samsung RD-840/1640 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. DVR
  5. RD-840/1640
  6. User manual

Samsung RD-840/1640 User Manual

8 channel/16 channel dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

8 CHANNEL/
16 CHANNEL DVR
User Manual
SRD-840/1640

Advertisement

Table of Contents
loading

Related Manuals for Samsung RD-840/1640

Summary of Contents for Samsung RD-840/1640

  • Page 1 8 CHANNEL/ 16 CHANNEL DVR User Manual SRD-840/1640...

  • Page 2: User Manual

    Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user's own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.

  • Page 3: Important Safety Instructions

    overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.

  • Page 4: Before Start

    • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.

  • Page 5: Table Of Contents

    CONTENTS OVERVIEW Important Safety Instructions Before Start Contents Features Part Names and Functions (Front) Part Names and Functions (Rear) Remote Control Installation CONNECTING WITH OTHER DEVICE Checking the installation environment Connecting the Video, Audio, and Monitor Connecting the USB Connecting POS Device Connecting the Alarm Input/Output Connecting the RS-485 Device Connecting the Network...
  • Page 6 overview Search SEARCH & PLAY Playback WEB VIEWER Introducing Web Viewer Connecting Web Viewer Using Live Viewer Using Search Viewer Viewer Setup About Mobile Viewer BACKUP VIEWER SEC Backup Viewer APPENDIX Product Specification Product Overview 101 Default Setting 104 Troubleshooting 107 Open Source License Report on the Product 6_ overview...
  • Page 7 FEATURES This DVR enables you to compress 8 or 16 channels of camera video sources into H.264 format, and to compress 4 channels of sound sources simultaneously before saving and recording on the HDD. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data.

  • Page 8: Standards Approvals

    overview Standards Approvals  This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 9: Part Names And Functions (Front)

    PART NAMES AND FUNCTIONS (FRONT) Part Names Functions USB Port Connects the USB devices. Remote Control Input the remote control signal. Receiver POWER : Displays the power ON/OFF status. LED Indicator ALARM : Lights on when an event occurs. REC : Lights on when recording is in progress. English _9...

  • Page 10: Part Names And Functions (Rear)

    overview PART NAMES AND FUNCTIONS (REAR) SRD-840 DC 12 V DC 12 V VGA OUT VGA OUT SPOT SPOT COM COM 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 ALARM ALARM IN SERIAL SERIAL NETWORK...

  • Page 11: Remote Control

    REMOTE CONTROL BACKUP SEARCH Displays the search menu. Displays the Backup Menu. MODE Changes the screen mode. Activates the DVR function. POWER Displays the Exit pop up screen. NUMBER [0~ + 10] Used as the numeric input keys, or displays a single channel.

  • Page 12: Connecting With Other Device

    • For the product with an input ground, use a grounded power plug. CHECKING THE INSTALLATION ENVIRONMENT Temperature Samsung Digital Video Recorder (“DVR” hereinafter) is a One Year: 24HR X 365 DAY =8,760 HR Unit: ºC state-of-art security device, and contains mass storage hard disk(s) and critical circuits inside.

  • Page 13: Connecting The Video, Audio, And Monitor

    CONNECTING THE VIDEO, AUDIO, AND MONITOR  The following figures are based on Model SRD-1640. CONNECTING THE USB 1. By factory default, a USB port is provided for external connection. 2. You can connect a USB HDD, USB memory or mouse to the USB port. 3.

  • Page 14: Connecting The Alarm Input/Output

    connecting with other device CONNECTING THE ALARM INPUT/OUTPUT Connecting the alarm input signal DC 12 V COM COM 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 ALARM ALARM ALARM IN...

  • Page 15: Connecting The Network

    CONNECTING THE NETWORK Connecting to Network through Ethernet (10/100BaseT) NETWORK RJ-45 Ethernet Cable (Direct Cable) Hub/Switcher Hub/Switcher Windows Network Viewer Connecting to the Network using the router xDSL or Cable Modem Broadband Router NETWORK xDSL or Cable Modem External Remote PC DDNS Server (Data Center) English _15...
  • Page 16 connecting with other device Connecting to Internet through ADSL INTERNET RJ-45 Ethernet Cable (Direct Cable) ADSL MODEM Hub/Switcher Windows Network Viewer 16_ connecting with other device...

  • Page 17: Starting The System

    live GETTING STARTED Starting the system 1. Connect the power cable of the DVR to the wall outlet.  It takes about 10 seconds to display the start screen after booting. 2. You will see the initialization screen. The initialization process will last about 1 minute. If a new HDD is installed, the initialization process may take longer.

  • Page 18: Locking All Buttons

    live Login To access a DVR or restricted menu, you should have logged in to the DVR. 1. In live mode, right-click any area of the screen. Scene Mode  2012-01-01 01:10:25 You will see the context sensitive menu as in the right ...

  • Page 19: Live Screen Configuration

    LIVE SCREEN CONFIGURATION Icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. 2012-01-01 00:00:01 CAM 01 CAM 01 Name Description Current Date, Time Displays the current time and date. Login Information When you are logged in, the “LOG ON”...

  • Page 20: Live

    live Error Information • If the internal HDD is not connected, the “NO HDD”( ) message will appear; if there occurs a problem, you will see the “HDD FAIL”( ) message in the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup.
  • Page 21 Menu Description Scene Mode Refer to “Live Mode”. (Page 23) Spot Out Refer to “Spot Out”. (Page 25) Audio On/Off Refer to “Audio ON/OFF”. (Page 26) Freeze Refer to “Freeze”. (Page 26) Stop the alarm output, deactivate the event icon and release the auto sequencing. Stop Alarm Refer to “Event Monitoring”.

  • Page 22: View The Launcher Menu

    live View the Launcher Menu The Launcher menu appears on the bottom of the live screen. 1. In Live mode, right-click to display the context menu and 2012-01-01 01:10:25 select <Show Launcher>. 2. Move the cursor to the bottom and click a desired item in the Launcher menu.

  • Page 23: Live Mode

    LIVE MODE SRD-1640 display Live images from 16 channels in a total of 8 layout of split screens. Switching the screen mode To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu.

  • Page 24: Channel Setting

    live Manual Switching Press the left/right button on the remote control, or click the arrow <◄/►> key to move to the next split mode. • If pressing the right [►] button in 9-split mode : 9-split (CH 1~9) mode  9-split (CH 10~16) mode  Auto Sequence CH10 CH11 CH12...

  • Page 25: Spot Out

    Switching to Single Mode When in split mode, select and double-click a desired channel to switch to its Single mode. Press the number corresponding to a desired channel the remote control to switch to its Single mode. Refer to “Remote Control > Using the numeric buttons”. (Page 11) ...

  • Page 26: Zoom

    live ZOOM This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. 1. Select <Zoom In> in the right-click menu. Press the [ZOOM] button on the remote control, or simply click < >...

  • Page 27: Event Monitoring

    EVENT MONITORING This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs. In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 44) • If multiple events occur simultaneously, the screen will switch to a split mode. - 2~4 events : 4-split mode - 5~9 events : 9-split mode - 10~16 events : 16-split mode...

  • Page 28: Using The Dvr

    using the DVR You can setup the system properties, devices, and options for recording, event, backup and network. SYSTEM SETUP You can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language You can check and setup the current Date/Time and time related properties, as well as the language used for the interface on the screen.

  • Page 29: Using The Calendar

    - Time Server : Enter an IP or URL address of the time Date/Time/Language server. Date/Time/Language Holiday - Last Sync Time : Displays the most recent  Date 2012 -01-01 YYYY-MM-DD Time Synchronization Setup synchronization time from the selected time server. - Activate as Server : Set to <Use>...
  • Page 30 using the DVR Permission Management You can set permissions of each user over the DVR's specific function and settings. Setting the Administrator You can set and change Administrator’s ID and password. The administrator can use and set all menu items and functions. Using the mouse may help make setup easier.

  • Page 31: Setting The Group

    Setting the Group You can create user groups and setup permissions for those user groups. You can register a user for each group in <User>. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <System> window to Permission Management move to <Permission Management>, and press Group...

  • Page 32: To Change The User Password

    using the DVR To restrict the user permissions If the admin restricts all permissions of an added group, the users belonging to that group can access only the default minimum menus and can change the user’s own password only. 1. Start the DVR. If all permissions are restricted, only the Login dialog should appear.

  • Page 33: Setting The User

    Setting the User Users can be added only if a group was created in <Group> menu. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <System> window to Permission Management move to <Permission Management>, and press User Admin Group...

  • Page 34: System Management

    using the DVR • Manual Input of ID : Prompts you to enter the user ID manually for the login process. - Checked ( ) : Encloses the registered user IDs with the [  ] symbols. Login Use the virtual keyboard to enter the user ID. ...

  • Page 35: Updating The Software

    • Updating the Software 1. Connect a device storing the software to be updated. System Management (It may take about 10 seconds to recognize the device.) System Information Settings  Upgradeable devices include USB memory and network device.  System Information ...

  • Page 36: Log Information

    using the DVR Settings You can copy and import the DVR settings by using a storage media. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <System> window to System Management move to <System Management>, and press [ENTER] Settings System Information button.

  • Page 37: Event Log

    Event Log Event log shows recorded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <System> window to Log Information move to <Log Information>, and press [ENTER] button.

  • Page 38: Setting The Device

    using the DVR SETTING THE DEVICE You can setup Camera, Storage Device, Remote Device, POS Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier. 1.
  • Page 39 • CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.)  Refer to “Using Virtual Keyboard”. (Page 30) • SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out. ...

  • Page 40: Storage Device

    using the DVR Setting the PTZ To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the “Remote Devices” settings. (Page 42) Using the mouse may help make setup easier. 1.
  • Page 41 Formatting You can format a storage device. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <Device> window to Storage Device move to <Storage Device>, and press [ENTER] button. Format Device HDD Alarm 2. Select <Format>. Device Select Used/Total...
  • Page 42 using the DVR  <Check> status means that the HDD is operating but it has problems that require technical examination. ) appears on the Live screen.  <Replace> status means that the HDD has defect and requires immediate replacement. ) appears on the Live screen. 4.
  • Page 43 • POS Device Setup : Sets the communication setups for the POS Device POS device and DVR. POS USE POS Device Setup  It is independent to the Remote Device setup. Preset  Port/Ethernet None No preset None POS Device Setup None No preset None...

  • Page 44: Setting Display Position

    • Video Output : You can set the video output mode. - Auto : The default is set to Composite. (In VGA mode, the “SAMSUNG” logo will be displayed) The main video mode will switch to VGA if a VGA monitor is connected. Then, the Composite port will act as SPOT source.

  • Page 45: Setting The Spot Out

    Setting the Spot Out You can set the DVR to output information / video apart from the monitor out. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <Device> window to Monitor move to <Monitor>, and press [ENTER] button. Spot Out Monitor Mode...

  • Page 46: Setting The Recording

    using the DVR SETTING THE RECORDING You can setup scheduled recording, event recording and other recording related settings. Recording Schedule Make your reservation on a date and time to schedule the recording on specified time. Using the mouse may help make setup easier. 1.

  • Page 47: Event Record Duration

    Recording Color Tags Color Function Description White No Recording No schedule / event recording Orange Continuous Scheduled recording only Blue Event Event recording only Green Both(Cont&Evnt) Both scheduled / event recordings Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>- <Both(Cont&Evnt)>.

  • Page 48: Record Option

    using the DVR Setting Event Recording Properties You can set each channel’s resolution, quality and fps for event recordings. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <Record> window to REC Quality & Resolution move to <REC Quality &...

  • Page 49: Setting The Event

    SETTING THE EVENT You can set recording options for sensor, motion, and video loss event. Sensor Detection You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration. Using the mouse may help make setup easier. 1.

  • Page 50: Motion Detection

    using the DVR Motion Detection You can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the area. Using the mouse may help make setup easier. 1.

  • Page 51: Video Loss Detection

    Video Loss Detection You can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <Event> window to Video Loss Detection move to <Video Loss Detection>, and press [ENTER] button.

  • Page 52: Backup

    • Type : Sets the backup data format. - DVR : Saved data can be played back only by the DVR. - SEC : Saves data in the Samsung’s proprietary format with built-in viewer, which supports immediate playback on a PC.

  • Page 53: Network Configuration

    5. When the backup setup is done, press <OK>.  If no available device is recognized for backup, <OK> button is not activated.  The application may slow down during the backup.  You can switch to the menu screen during the backup in operation, but playback of data is not available. ...

  • Page 54: Setting The Protocol

    using the DVR • IP, Gateway, Subnet Mask, and DNS Connection Mode - For <Static IP> : You can directly input IP address, Connection Protocol Gateway, Subnet Mask and DNS.  Connection Mode ADSL  Bandwidth 600kbps - For <Dynamic IP> : IP address, Gateway, and Subnet ...

  • Page 55: Connecting And Setting The Network

    Connecting and Setting the Network Networking may differ from the connection method, check your environment before setting the connection mode. When no router is used • Static IP mode - Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the DVR and remote user.
  • Page 56 using the DVR When a router is used  To avoid IP address conflict with the DVR's static IP, check followings : • Setting the DVR with a static IP - Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Area Network (LAN) environment.

  • Page 57: Ddns Setting

    DDNS You can set the DDNS site for a remote user’s network connection. Using the mouse may help make setup easier. 1. Use the up/down buttons () in <Network> window to DDNS move to <DDNS>, and press [ENTER] button.  DDNS Site iPOLiS 2.

  • Page 58: Mailing Service

    using the DVR Mailing Service You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.  If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set to <OFF>, only the text notification will be sent to the applicable email address.

  • Page 59: Event Setting

    Event Setting You can set the interval and type of the event that will be sent to the user. Using the mouse may help make setup easier. 1. In the <Network> setting window, press the up/down Mailing Service () button to move to <Mailing Service> and press the Event SMTP Group...

  • Page 60: Recipient Setting

    using the DVR Recipient Setting You can add/remove a recipient(s) to/from the specified group and edit the group if necessary. Using the mouse may help make setup easier. 1. In the <Network> setting window, press the up/down Mailing Service () button to move to <Mailing Service> and press the Recipient SMTP Event...

  • Page 61: Controlling A Ptz Device

    CONTROLLING A PTZ DEVICE The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference. PTZ Device The PTZ device can be activated only if a channel in connection with the PTZ camera is selected. Getting started with PTZ The PTZ camera is available, only if a channel is selected, in the following way : ...

  • Page 62: Using The Ptz Camera

    • Pattern : Makes the PTZ camera remember and follow the past route.  The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are different in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.

  • Page 63: Camera Setting

    The camera-specific menu appears. ** ** MAIN MENU MAIN MENU ** **  You can configure the settings of only those cameras that support CAMERA SET... the protocols of Samsung, Pelco D/P, AD and Panasonic. VIDEO SET... VIDEO SET... PRESET... PRESET... ...

  • Page 64: Search & Play

    search & play SEARCH You can perform the search for recorded data by the time or by the search criteria such as an event. You can access the <Search> menu directly in Live mode. 1. In Live mode, right-click any area of the screen. Scene Mode ...

  • Page 65: Event Search

    • Zoom In : The map enlarges in detail. Time Search It will switch in the sequence of 24 hours - 16 hours - 8 hour 2012-01-01 Go to First Go to Last - 4 hours. Overlapped Data List1 Zoom In Zoom Out •...

  • Page 66: Pos Search

    search & play POS Search You can search for data in the POS device that is connected to the DVR. You can use the mouse to select the related items. 1. Select <POS Search> in the <Search> menu. POS Search ...

  • Page 67: Playback

    PLAYBACK Play You can play data stored in the HDD and backup a desired portion of the data. Using the mouse may help make setup easier. 1. In Live mode, click <Play> in the right-click menu or Scene Mode  2012-01-01 01:10:25 <...
  • Page 68 search & play Using the Playback Button Part Names Functions Play Timeline Indicates the current playback point, and can be used to move. Skip Backward Moves backward by unit time. Backward Fast Used for quick backward playback. Play Backward Slow Used for backward frame-by-frame search while in PAUSE.

  • Page 69: Web Viewer

    web viewer INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows remote access to your DVRs. You have access to live video, archived video, PTZ control (if configured), etc. Product Features • Remote connection using the browser • PTZ camera control enabled •...

  • Page 70: Connecting Web Viewer

    web viewer CONNECTING WEB VIEWER 1. Open your web browser and type the IP address or URL of DVR into the URL address box. The basic URL of the DVR is as following in case of MAC address :  http://www.samsungipolis.com/Product ID –...

  • Page 71: Using Live Viewer

    5. You may have “Windows Security Alert” that attempts to block this with the Windows Firewall. In that case, click <Unblock> to start Web Viewer. 6. Installation is complete. Now you can see the main screen of Live Viewer. USING LIVE VIEWER The Live Viewer screen consists of following : This displays the IP address and the model name of the connected DVR.
  • Page 72 web viewer OSD Information Display Display the channel number and video size of the connected DVR. This icon will appear if the audio signal is currently being output. The current date and time will be displayed according to the selected time information display setting <DVR Time> or <PC Time>.
  • Page 73 Connected DVR This displays the IP address and the status of the connecting DVR.  Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is exceeded. ...
  • Page 74 • CAPTURE : Saves the current screen into a BMP or JPEG file.  The default saving path is “C:\Program Files\Samsung\DVR Web Viewer\SnapShot\Live”. To change the saving path, click <SAVE PATH ( )> button and then select the path you want.

  • Page 75: Using Ptz Camera

     To record it, it is required at least 1GB of available space.  The default saving path is “C:\Program Files\Samsung\DVR Web Viewer\VideoClip\Live”. To change the saving path, click <SAVE PATH ( )> button and then select the path you want.
  • Page 76 Upward dragging will zoom out, while downward dragging will zoom in.  Tilt of Power PTZ operates properly within 45°.  Power and Pan Tilt functions are only available for camera supporting the functions. Ex : Samsung SCC-C6475 76_ web viewer...

  • Page 77: Using Search Viewer

    USING SEARCH VIEWER The Search Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. There are 4 tabs available: <LIVE>, <SEARCH>, <SETUP>, <ABOUT>. Switch to a split mode. Shows the IP address and model name of the connected DVR. Select to turn the sound on/off.
  • Page 78 web viewer Split-Screen You can change the split mode by clicking each number icon. SINGLE MODE QUAD MODE • Click < > button. The screen displays the selected camera connected to the DVR in “SINGLE MODE”. • Click < > button. The screen displays the selected camera connected to the DVR in “QUAD MODE”.
  • Page 79 Saving the Live Screen on the PC • CAPTURE : Saves the current screen into a BMP or JPEG file.  The default saving path is “C:\Program Files\Samsung\DVR Web Viewer\SnapShot\Search”. To change the saving path, click <SAVE PATH ( )> button and then select the path you want.

  • Page 80: Searching The Recorded Video In The Calendar

    web viewer Searching the Recorded Video in the Calendar If the video data has been recorded on a date, the date is distinguished in green. If you click the date, the recorded video information is displayed in the time line. When you click <Today>, it will be synchronized with the system time (date) of the current PC.

  • Page 81: Controlling Playback

    Controlling Playback Fast Backward : Play the video reversely. (at x2 ~ x64) Reverse Play : Performs Reverse Play. Play : Performs playback. Fast Forward : Play the video forward. (at x2 ~ x64) Go to First : Moves the beginning time of recorded video in the time line. Step Backward : Performs one step reverseplay by one frame.
  • Page 82 web viewer • Time Synchronization Setup Set the time synchronization. • Display Date Format : Set the date type. Time : Select a time format to display on the screen. • DST (Daylight Saving Time) DST is displayed an hour ahead of the standard time of the time zone.
  • Page 83 • Group Users are classified into groups and the permission can be set according to the group.  First of all, add a group. • User You can add, change or remove a user or users. • Setup You can set the user permission. System Management For more information, refer to <System Management>...
  • Page 84 web viewer Device You can check a list of devices that are connected to the DVR and configure the necessary settings. Click <Device> in the menu screen. For more information, refer to “Setting the Device”. (Page 38) Camera • Camera You can configure the settings of the camera that is connected to the DVR.

  • Page 85: Remote Device

    Storage Device You can check and change the settings of the storage device. • Device You will see a list of storage devices that are connected to the DVR. You can check the type, used/total, usage and status of the device.
  • Page 86 web viewer Monitor • Monitor You can configure the monitoring screen settings and set the output system. • Spot Out With the monitor connected via the SPOT port, if there occurs an event such as Sensor, Motion, or Alarm, you can select a video output mode for external monitoring.

  • Page 87: Recording Schedule

    Record For more information, refer to <Setting the Recording>. (Page 46) Recording Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. - Apply to All CH : Click <Apply to All CH> to display the confirmation window.
  • Page 88 web viewer REC Quality & Resolution • Standard/Event You can set the resolution, frame rate and recording quality for each channel. Record Option You can set the Disk End Mode. Event For more information, refer to <Setting the Event>. (Page 49) Sensor Detection You can set the sensor operation mode and the synchronized camera as well as the alarm output type and the duration.
  • Page 89 Motion Detection You can set the motion detection mode and the sensitivity as well as the alarm output type and the duration. • Motion Region Set the target motion detection area Video Loss Detection You can set the alarm output time if a video loss occurs. Alarm Schedule You can schedule the alarm output according to the day of the week and the time.
  • Page 90 web viewer Network For more information, refer to <Network Configuration>. (Page 53) Connection A remote user can access the DVR via the network to check the current mode and the IP address. • Connection You can set the network connection route. •...

  • Page 91: Live Transfer

    Live Transfer A remote user can set the images of the DVR. • Live Transfer You can specify the quality of the image data that a remote user will receive. Mailing Service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. •...

  • Page 92: About

    web viewer • Group You can add a group to receive the mail if an event occurs and set the permission to receive the event mail for each group. • Recipient You can add a user or users who will receive the mail. ABOUT Click <ABOUT>.

  • Page 93: Mobile Viewer

    MOBILE VIEWER What is Mobile Viewer? iPOLIS mobile is smartphone application that enables you to connect to DVR (Digital Video Recorder) remotely and control the video playback and PTZ operations (if configured) in real time. Key Features • Remote access via Smart phone •...

  • Page 94: Backup Viewer

    backup viewer SEC BACKUP VIEWER You can play a file that is backed up in the format of SEC. Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer. If you run the backup file viewer, the backup data file will be automatically played.
  • Page 95 Name Description A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated. Audio You can adjust the volume level from 0 to 100. Saves the current screen as an image file. Supported file formats include BMP and JPEG.

  • Page 96: Appendix

    appendix PRODUCT SPECIFICATION Details Item SRD-1640 SRD-840 Inputs 16 composite video 0.5–1 Vpp, 75 ohm 8 composite video 0.5–1 Vpp, 75 ohm Video Resolution 704x480 NTSC, 704x576 PAL Frame rate 480fps NTSC, 400fps PAL 240fps NTSC, 200fps PAL Live Resolution 704x480 NTSC, 704x576 PAL Multi Screen display 1/4/6/8/9/13/16/SEQUENCE/PIP...
  • Page 97 USB 2.0, 2 ports (Front) Connections e-SATA – Application Supoort Mouse, Remote Controller Samsung-E / Samsung-T / Pelco-D / Pelco-p / Panasonic / Phillips / AD / DIAMOND / PTZ Protocol support ERNA / GE / VCL TP / VICON / ELMO English _97...
  • Page 98 appendix Details Item SRD-1640 SRD-840 General Input Voltage /Current DC12V Adaptor,4A,100~250VAC, 50~60Hz, 48watt Electrical Power consumption Max.36 W (with 1x HDD) Operating Temperature Environmental +0°C to +40°C (+32°F to +104°F)/ 20%RH to 85%RH /Humidity Dimension (W x H x D) W360 x H44 x D160 mm (14.17 x 1.73 x 6.30 inches) Mechanical Weight (With hard disks) 1.72Kg 1.68Kg...

  • Page 99: Product Overview

    PRODUCT OVERVIEW ❖ SRD-840 unit : mm (inches) 360 (14.17") English _99...
  • Page 100 appendix ❖ SRD-1640 unit : mm (inches) 360 (14.17") 100_ appendix...

  • Page 101: Default Setting

    DEFAULT SETTING This returns the factory default settings. The settings are made as follows; • Use System/Load Factory Default in MENU  The default settings are based on SRD-1640.  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
  • Page 102 appendix Category Details Factory Default Baudrate 9600 Parity None Data Remote Device Stop bit Transfer Type Half Duplex System Keyboard Remote Control ON(00) POS Device Device Event Display Display Monitor Multi CH SEQ Time 5 sec Video Output Auto Monitor Display Position Setup Spot Out 1 CH1 ~ CH16...
  • Page 103 Category Details Factory Default Sensor Operation Camera Camera No. Sensor Detection Alarm None Duration 10 sec Mode Sensitivity Level10(high) Event Motion Detection Alarm None Duration 10 sec Motion Region All Area Video Loss State Video Loss Detection Alarm None Duration 10 sec Alarm Schedule Alarm1...

  • Page 104: Troubleshooting

    appendix TROUBLESHOOTING Symptom Countermeasures  Check if the power supply system is properly connected. The system does not turn on and the indicator on the  Check the system for the input voltage from the power source. front panel does not work at all. ...
  • Page 105 Symptom Countermeasures  It takes time for the DVR to recognize multiple external HDDs. Try again I've found that the DVR does not recognize as many disks as installed when I have connected multiple in a moment and if the problem (of failure to recognize as many HDDs external HDDs to the DVR.
  • Page 106 appendix Symptom Countermeasures  If your player does not display a Live image at all, that indicates Recording does not work. recording does not work so first check if you see an image on the screen.  Recording does not work if the recording settings are not properly configured.

  • Page 107: Open Source License Report On The Product

    The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 108 compilation and installation of the executable. However, as a special NO WARRANTY exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, components (compiler, kernel, and so on) of the operating system on THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT which the executable runs, unless that component itself accompanies...

  • Page 109: Terms And Conditions

    A “covered work” means either the unmodified Program or a work GNU GENERAL PUBLIC LICENSE based on the Program. Version 3, 29 June 2007 To “propagate” a work means to do anything with it that, without Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/> permission, would make you directly or secondarily liable for Everyone is permitted to copy and distribute verbatim copies of this license infringement under applicable copyright law, except executing it on a...
  • Page 110 3. Protecting Users’ Legal Rights From Anti-Circumvention Law. Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding No covered work shall be deemed part of an effective technological Source may be on a different server (operated by you or a third measure under any applicable law fulfilling obligations under article 11 of party) that supports equivalent copying facilities, provided you...
  • Page 111 requiring that modified versions of such material be marked in a cross-claim or counterclaim in a lawsuit) alleging that any patent claim reasonable ways as different from the original version; or is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
  • Page 112 License will continue to apply to the part which is the covered work, but specially designated software packages--typically libraries--of the Free the special requirements of the GNU Affero General Public License, Software Foundation and other authors who decide to use it. You can section 13, concerning interaction through a network will apply to the use it too, but we suggest you first think carefully about whether this combination as such.
  • Page 113 this Lesser General Public License (also called “this License”). Each 4. You may copy and distribute the Library (or a portion or derivative of licensee is addressed as “you”. it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the A “library”...

  • Page 114: Openssl License

    It may happen that this requirement contradicts the license restrictions 14. If you wish to incorporate parts of the Library into other free of other proprietary libraries that do not normally accompany the programs whose distribution conditions are incompatible with these, operating system.
  • Page 115 documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)” 4.
  • Page 123 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
  • Page 124 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

Table of Contents