ENHANCED VISION DaVinci Pro User Manual page 7

Caring for DaVinci Pro
• Always turn the power OFF by pressing the power button on the front of the device for five
seconds when DaVinci Pro is not in use. (Please avoid trying to Shut Down the device by
spontaneously removing from power)
• Optionally you may also place the device into "Standby" state which is a power saving
mode by pressing the power button for less than 5 seconds.
• Ensure that your DaVinci Pro is completely OFF before cleaning.
• Clean DaVinci Pro with a soft dry cloth or an electrostatic dusting cloth. DO NOT use liquid
cleaners on its plastic surfaces.
• The protective glass covering the camera can be cleaned as needed with the lens cloth
provided within the packaging of DaVinci Pro.
Susceptibility to Interference:
There may be temporary degradation of the image when DaVinci Pro is subjected to
strong radio frequency field, electro-static discharge or transient electrical noise. An
electro-static discharge (caused by static electricity) may cause the screen to go blank. If
this happens, disconnect the AC power from the electrical outlet, wait 30 seconds, and
connect the AC power again.
a
7