Related Manuals for Marshall Electronics V-R151-4P
Summary of Contents for Marshall Electronics V-R151-4P
- Page 1 Marshall Electronics Broadcast Multimedia Division 1 5 ” R a c k m o u n t a b l e L C D P A N E L w i t h Q u a d - S p l i t t e r...
- Page 2 Table of Contents 1. Installation ..................3 1) Before Installation ..............3 2) Components ................3 3) Operation ..................3 4) Tally ....................3 5) Mounting ..................3 6) Connections ................4 2. Computer ..................5 1) Computer Mode Selection ............5 2) Horizontal pan / Vertical Pan control ........5 3) Value Default ................5 4) Color Change ................5 5) Input Condition Control..............5...
-
Page 3: Installation
Video Inputs 4) Tally The V-R151-4P comes with four tally lights installed to correspond with the quad split screen. The lights are operated by inserting a DB9 plug into the jack marked ‘TALLY’ on the rear of the unit. The lights will come on by closing the two contacts together. DO NOT GIVE POWER TO THIS PLUG IT IS SELF-POWERED. -
Page 4: Power Supply
5. The Quad Splitter INSTALLATION cont. The quad splitter buttons, located on the left of the unit, are dual function buttons, the functions are indicated above and below each button. The four buttons on the right are used to select the video MONITOR channel, in the zoom mode and the setup mode, these buttons will be used to navigate around the screen and will be explained later. - Page 5 3) OSD ( On Screen Display) control 2. Computer 1) Computer Mode Selection Press (INPUT) using the UP, DOWN keys press (MONITOR) and than press select. Press Menu Select (System Setting) Select OSD U/D) or OSD L/R) use the UP, DOWN keys 2).
-
Page 6: Composite Video / S-Vhs
4. Menu Tree 3. Composite Video / S-VHS 1) PC Monitor 1) Composite Video / S-VHS Selection Press (INPUT) using the UP, DOWN keys press (COMPOSITE) or (S-VHS) and than press 2) Value Default Press (MODE) press (NTSC) or (PAL) depends on manu- factured country Video Mode will not work on (TV) and (Monitor) 3) Color Change Press...