Connecting An Hd Radio Receiver - Marantz SR6006 Getting Started

Connecting an HD Radio receiver

• By connecting a HD Radio antenna to this unit, you can receive
HD Radio programs.
• HD Radio broadcasting currentry is available in the United States and
select other countries.
Direction of broadcasting station
AM loop antenna (for HD Radio
FM outdoor
broadcasting, supplied)
antenna
• To prevent interference, install
at least 3.3 ft/1 m away from
the antenna connected to the
this unit's other AM tuner
terminal.
75 Ω coaxial
q w
cable
White
Black
FM indoor antenna
(for HD Radio
broadcasting,
supplied)
Ground
n AM loop antenna assembly
1
Put the stand section
through the bottom of the
loop antenna from the
rear and bend it forward.
2
Insert the projecting part
into the square hole in
the stand.
e
n Using the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.
Standing alone
Use the procedure shown above to assemble.
AM outdoor
antenna
NOTE
• Do not connect two FM antennas simultaneously.
Stand
• Even if an external AM antenna is used, do not disconnect the AM
Square
loop antenna.
hole
• Make sure the AM loop antenna lead terminals do not touch metal
Loop
parts of the panel.
Projecting
antenna
• If the signal has noise interference, connect the ground terminal
part
(GND) to reduce noise.
• If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. For details, inquire at the retail store
where you purchased the unit.
Nail, tack, etc.
15