Marantz SR6008 Owner's Manual

Marantz SR6008 Owner's Manual

Av surround receiver
Hide thumbs Also See for SR6008:
Table of Contents

Advertisement

Quick Links

Contents
Connections
Playback
Settings
Tips
Appendix
AV Surround Receiver
SR6008
You can print more than one page of a PDF onto a single sheet of paper.
Owner's Manual
Front panel
Display
Rear panel
Remote
Index

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR6008 and is the answer not in the manual?

Questions and answers

Sid Graham
February 2, 2025

If i choose to reset to original factory settings, where in the manual does it display how to set up the amp with components such as tv and dvd and speakers etc.

1 comments:
Mr. Anderson
February 10, 2025

To set up the Marantz SR6008 amplifier with a TV, DVD player, and speakers after resetting to factory settings, follow these steps:

1. Power Connection: Plug the receiver into a power outlet using the supplied power cable (CA 120V, 60Hz).

2. Speaker Connection: Connect speakers to the proper speaker terminals, ensuring they match the impedance requirements (6–8Ω).

3. TV Connection: Use an HDMI cable to connect the HDMI OUT port on the receiver to the HDMI IN port on the TV.

4. DVD Player Connection: Connect the DVD player to the receiver using an HDMI cable (preferred) or analog/audio cables.

5. Initial Setup:
- Turn on the receiver.
- Follow the on-screen setup assistant displayed on the TV.
- Use the remote control to navigate and configure audio and video settings.

6. Language Selection: Choose the preferred language when prompted.

7. Audio/Video Configuration:
- Follow the on-screen instructions to configure the speaker setup.
- Assign input sources for devices like the DVD player.

8. Save Settings and Test: After completing the setup, test audio and video output by playing content from the DVD player.

This ensures proper configuration for optimal performance.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Marantz SR6008

  • Page 1 Contents Connections Playback Settings Tips Appendix AV Surround Receiver SR6008 You can print more than one page of a PDF onto a single sheet of paper. Owner’s Manual Front panel Display Rear panel Remote Index...
  • Page 2: Table Of Contents

    Remotely connecting Marantz devices ·········································· 49 Remote control unit ······································································ 19 Remotely control a Marantz Blu-ray player Connections by the Marantz Remote App ·························································· 50 DC OUT jack ··················································································· 50 Speaker connection ······································································ 22 Connecting the power cord ························································ 51 Speaker installation ········································································...
  • Page 3 Contents Connections Playback Settings Tips Appendix Playing an iPod Viewing photographs on the Flickr site ··············································································· 55 ································· 77 Listening to music on an iPod ························································ 56 Viewing photographs shared by particular users ··························· 78 Setting operation mode (iPod Browse Mode) ································ 57 Viewing all photographs on Flickr ···················································...
  • Page 4 Contents Connections Playback Settings Tips Appendix Convenience functions InstaPrevue function ······························································ 100 ·································································· 122 Performing repeat playback (Repeat) ··········································· 101 Switching input sources ······························································· 123 Performing random playback (Random) ······································· 101 Setting how to display sub screens ············································· 123 Add to favorites from the Option menu (Save to Favorites) ········ 102 Changing the display location of sub screens ······························...
  • Page 5 Contents Connections Playback Settings Tips Appendix Audyssey ® Setup Settings ········································································ 164 Procedure for speaker settings (Audyssey ® Setup) ···················· 166 Menu map ······················································································ 135 Error messages ············································································ 171 Retrieving Audyssey ® Setup settings ··········································· 172 Menu operation ············································································ 142 Manual Setup Inputting characters ···································································...
  • Page 6: Tips

    Contents Connections Playback Settings Tips Appendix Specifying the zone used with the remote control unit ··················································· 191 Tips Contents ························································································· 192 Tips ······························································································· 193 Troubleshooting ··········································································· 195 Resetting factory settings ························································· 208 Appendix About HDMI ···················································································· 209 Video conversion function ····························································...
  • Page 7: Accessories

    Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
  • Page 8: Inserting The Batteries

    Contents Connections Playback Settings Tips Appendix Inserting the batteries Operating range of the remote control unit q Remove the rear lid in the direction of the arrow and remove it. Point the remote control unit at the remote sensor when operating it. Approx.
  • Page 9: Features

    Contents Connections Playback Settings Tips Appendix Features High quality sound High performance • With discrete circuit technology, the power amplifier provides • Digital video processor upscales analog video signals (SD resolution) identical quality for all 7-channels (150 Watts x 7-channels) to HD (720p/1080p) and 4K (vpage 209) For optimum realism and stunning dynamic range, the power amplifier This unit features a sophisticated video processor that can upscale section features discrete power devices (not integrated circuitry).
  • Page 10: Easy Operation

    • M-XPort (Marantz-eXtension Port) (vpage 48) console, HD digital camcorder, HDTVs, etc. This unit is equipped with the M-XPort, a Marantz original innovation that provides outstanding expandability. You can connect the Wireless • Supports HDMI (3D, ARC, Deep Color, “x.v.Color”, Auto Lip Sync, Receiver RX101 (sold separately) to this port.
  • Page 11: Front Panel

    Contents Connections Playback Settings Tips Appendix Part names and functions Front panel Q0 Q1 Q2 Front panel Display Rear panel Remote Index...
  • Page 12 Contents Connections Playback Settings Tips Appendix PURE DIRECT button This switches the sound mode between DIRECT/PURE DIRECT and AUTO (vpage 110). M-DAX button This enables the M-DAX mode (vpage 148). ZONE2 ON/OFF button This turns the power of ZONE2 on/off (vpage 133). ZONE2 SOURCE button This selects the input source for ZONE2 (vpage 133).
  • Page 13 Contents Connections Playback Settings Tips Appendix SETUP MIC jack Used to connect the supplied Setup and measurement microphone (vpage 167). VOLUME knob This adjusts the volume level (vpage 54). Remote control sensor Display This displays various pieces of information (vpage 14). M-DAX indicator This lights when the M-DAX mode is selected (vpage 148).
  • Page 14: Display

    Contents Connections Playback Settings Tips Appendix Display The input source name, sound mode, setting values and other information are displayed here. 2 Standard display 2 Tuner display These light according to the reception conditions when the input source is set to “TUNER”. Lights up when the broadcast is properly turned in.
  • Page 15: Rear Panel

    Contents Connections Playback Settings Tips Appendix 2 Sleep timer display 2 ZONE2 power on display This lights when the sleep mode is selected (vpage 124). This lights up when ZONE2 (separate room) power is turned on (vpage 133). Front panel Display Rear panel Remote Index...
  • Page 16 Contents Connections Playback Settings Tips Appendix Rear panel HDMI IN HDMI OUT 1 CBL/SAT 2 DVD 3 Blu-ray 4 GAME 5 MEDIA PLAYER 6 AUX2 ZONE2 MONITOR (ASSIGNABLE) CBL/SAT AUDIO COAXIAL OPTICAL REMOTE VIDEO IN M-XPort VIDEO OUT COMPONENT VIDEO IN (ASSIGNABLE) COMPONENT VIDEO OUT CONTROL...
  • Page 17 Contents Connections Playback Settings Tips Appendix HDMI connectors Used to connect devices equipped with HDMI connectors (vpage 33, 34, 37, 38). HDMI IN 1 CBL/SAT 2 DVD 3 Blu-ray 4 GAME 5 MEDIA PLAYER 6 AUX2 HDMI OUT ZONE2 MONITOR CBL/SAT (ASSIGNABLE) AUDIO COAXIAL...
  • Page 18 Contents Connections Playback Settings Tips Appendix Analog audio connectors (AUDIO) Q5 Q4 Used to connect devices equipped with analog audio connectors (vpage 37, 38, 40). HDMI IN 1 CBL/SAT 2 DVD 3 Blu-ray 4 GAME 5 MEDIA PLAYER 6 AUX2 HDMI OUT ZONE2 (ASSIGNABLE) MONITOR...
  • Page 19: Remote Control Unit

    Contents Connections Playback Settings Tips Appendix Remote control unit ZONE SELECT buttons (MAIN, ZONE2) These switch the zone (MAIN ZONE, ZONE2) that is operated through the remote control unit (vpage 133, 142). Input source select buttons These select the input source (vpage 53). MUTE button ( This mutes the output audio (vpage 54).
  • Page 20 Contents Connections Playback Settings Tips Appendix SOUND MODE buttons These select the sound mode (vpage 108). • MOVIE button • MUSIC button • GAME button • PURE button Remote control signal transmitter This transmits signals from the remote control unit (vpage 8). SLEEP button This sets the sleep timer (vpage 124). POWER button (X) This turns the power on/off (vpage 53).
  • Page 21: Cables Used For Connections

    Contents Connections Playback Settings Tips Appendix Connections 2 Cables used for connections Speaker connection (vpage 22) Provide necessary cables according to the devices you want to connect. Connecting a TV (vpage 32) Speaker cable Connecting a playback device (vpage 36) Connecting an iPod or USB memory device to the USB Subwoofer cable port (vpage 42) HDMI cable...
  • Page 22: Speaker Connection

    Contents Connections Playback Settings Tips Appendix Speaker connection Install speakers and connect them to this unit (vpage 22, 25). Speaker installation Determine the speaker system depending on the number of speakers you FL/FR : Place the FRONT left and right speakers an equal distance from are using and install each speaker and subwoofer in the room.
  • Page 23 Contents Connections Playback Settings Tips Appendix 2 Typical speaker layout z1 22˚ – 30˚ • This unit is compatible with Audyssey DSX® (vpage  224), Dolby Pro Logic gz z2 22˚ – 45˚ (vpage  226) and DTS Neo:X (vpage  227) which offers an even wider and z3 55˚...
  • Page 24: Front Panel Display Rear Panel

    Contents Connections Playback Settings Tips Appendix 2 When 5.1-channel speakers are installed z1 22˚ – 30˚ z2 120˚ Front panel Display Rear panel Remote Index...
  • Page 25: Speakers

    Contents Connections Playback Settings Tips Appendix 2 Connecting the speaker cables Speaker connection Carefully check the left (L) and right (R) channels and + (red) and – Here we connect the speakers in the room to this unit. (black) polarities on the speakers being connected to this unit, and be This section explains how to connect them using typical examples.
  • Page 26: Connecting The Subwoofer

    Contents Connections Playback Settings Tips Appendix 2 Connecting the subwoofer Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. The same signal is output from each subwoofer terminal. COMPONENT VIDEO IN (ASSIGNABLE) COMPONENT VIDEO OUT 1 CBL/SAT MONITOR 2 DVD...
  • Page 27 Contents Connections Playback Settings Tips Appendix 2 About the speaker cable label (supplied) for GHow to attach the speaker cable labelH channel identification Speaker This unit The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable. Speaker terminals Color FRONT L...
  • Page 28 Contents Connections Playback Settings Tips Appendix 2 Connecting 9.1-channel speakers The illustration shows a typical connection method. COMPONENT VIDEO IN COMPONENT VIDEO OUT (ASSIGNABLE) 1 CBL/SAT MONITOR 2 DVD FRONT CENTER SURROUND SURROUND BACK ZONE2 FRONT CENTER SURROUND SURROUND BACK SUBWOOFER SUBWOOFER 7.1CH IN...
  • Page 29 Contents Connections Playback Settings Tips Appendix 2 About the front B speaker connections The speaker connected to the SURROUND BACK terminal differs depending on the mode selected for “Assign Mode” (vpage  173) in the menu. • For how to connect the front, center, and surround speaker and the subwoofer to this unit, see “Connecting 9.1-channel speakers”...
  • Page 30 Contents Connections Playback Settings Tips Appendix 2 About the Bi-amp connection Some audiophile loudspeakers can be connected to an amplifier with two separate amp-to-speaker connections per each speaker. One amplifier channel’s output is hooked up to the speaker’s bass driver (woofer), while the other amplifier drives the upper range transducers (tweeter, or in some cases midrange and tweeter).
  • Page 31: Cbl/Sat 2 Dvd 3 Blu-Ray

    Contents Connections Playback Settings Tips Appendix 2 Connecting an external power amplifier • You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. Adding an external power amplifier with a higher power output rating than this unit may be beneficial with loudspeakers that have lower efficiency and/or lower impedances, or to reach higher volume levels.
  • Page 32: Connecting A Tv

    Contents Connections Playback Settings Tips Appendix Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
  • Page 33: And Compatible With The Arc (Audio Return Channel)

    Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control”...
  • Page 34: Connection 2 : Tv Equipped With An Hdmi Connector

    Contents Connections Playback Settings Tips Appendix Connection 2 : TV equipped with an HDMI connector Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. OPTICAL HDMI HDMI IN...
  • Page 35: Connection 3 : Tv Equipped Without An Hdmi Connector

    Contents Connections Playback Settings Tips Appendix Connection 3 : TV equipped without an HDMI connector Use a video or a component cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. VIDEO COMPONENT VIDEO OPTICAL...
  • Page 36: Connecting A Playback Device

    Contents Connections Playback Settings Tips Appendix Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of video output connectors (HDMI, component video and composite video). Select input connectors on this unit according to the connectors equipped on the device you want to connect.
  • Page 37: Connecting A Set-Top Box (Satellite Tuner/Cable Tv)

    Contents Connections Playback Settings Tips Appendix Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select input connectors on this unit according to the connectors equipped on the device you want to connect. (HDMI incompatible device) Satellite tuner/ Satellite tuner/Cable TV...
  • Page 38: Connecting A Dvd Player

    Contents Connections Playback Settings Tips Appendix Connecting a DVD player This explanation uses the connection with a DVD players as an example. Select input connectors on this unit according to the connectors equipped on the device you want to connect. (HDMI incompatible device) DVD player DVD player...
  • Page 39: Connecting A Video Camcorder Or Other Device

    Contents Connections Playback Settings Tips Appendix Connecting a video camcorder or other device Connect a playback device to this unit, such as a video camcorder or game console. This explanation uses the connection with a video camcorders as an example. (HDMI incompatible device) Video...
  • Page 40: Connecting A Turntable

    Contents Connections Playback Settings Tips Appendix Connecting a turntable You can enjoy playing records. • This unit is compatible with turntable with an MM cartridge. When you connect to a turntable with an MC cartridge, use a commercially available MC head amp or a step-up transformer.
  • Page 41: Connecting A Device With A Multi-Channel Output Connector

    Contents Connections Playback Settings Tips Appendix Connecting a device with a multi-channel output connector You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video. To play analog signals input from 7.1CH IN connectors, set “Input Mode” (vpage 163) to “7.1CH IN”. Devices with a multi-channel output connector (Blu-ray Disc player, DVD player, External decoder etc.)
  • Page 42: Connecting An Ipod Or Usb Memory Device To The Usb Port

    • Marantz does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use that device’s supplied AC adapter. NOTE • USB memory devices will not work via a USB hub.
  • Page 43 Contents Connections Playback Settings Tips Appendix 2 Supported iPod models • iPod classic • iPod nano • iPod touch • iPhone Front panel Display Rear panel Remote Index...
  • Page 44: Connecting An Fm/Am Antenna

    Contents Connections Playback Settings Tips Appendix Connecting an FM/AM antenna AM loop antenna After connecting the antenna and receiving a broadcast signal Direction of broadcasting station (supplied) (vpage  63 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. FM outdoor antenna 75 Ω/ohms...
  • Page 45 Contents Connections Playback Settings Tips Appendix 2 AM loop antenna assembly 2 Using the AM loop antenna Suspending on a wall Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Suspend directly wall without...
  • Page 46: Connecting To A Home Network (Lan)

    Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. • Playback of network audio such as Internet Radio and from your media server(s) (Network Attached • Playback of music content from online Storage)
  • Page 47 Contents Connections Playback Settings Tips Appendix • When using this unit, we recommend you use a router equipped with the following functions: • Built-in DHCP server This function automatically assigns IP addresses on the LAN. • Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater.
  • Page 48: Connecting A Wireless Receiver (Rx101)

    Contents Connections Playback Settings Tips Appendix Connecting a wireless receiver (RX101) You can connect a wireless receiver (RX101, Wireless receiver (RX101) sold separately) to play back music on your Bluetooth device with this unit. To do this, switch the input source to “M-XPort” (vpage 53 “Selecting the input source”).
  • Page 49: Connecting An External Control Device

    2 Performing operations by RC on this unit without visual contact When you are using a Marantz device other than this unit that supports remote connection, you can transmit remote control signals just by You can connect an external IR receiver to the REMOTE CONTROL...
  • Page 50: By The Marantz Remote App

    When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit. Marantz Blu-ray disc player of newer generation also can be controlled via The DC OUT jack outputs a maximum 12 V/150 mA electrical signal.
  • Page 51: Connecting The Power Cord

    Contents Connections Playback Settings Tips Appendix Connecting the power cord After completing all the connections, insert the power plug into the power outlet. HDMI OUT 5 MEDIA PLAYER 6 AUX2 ZONE2 MONITOR COMPONENT VIDEO OUT AC IN MONITOR SURROUND SURROUND BACK SURROUND BACK SURROUND BACK SURROUND BACK...
  • Page 52 Contents Connections Playback Settings Tips Appendix Playback Turning the power on (vpage 53) Listening to Spotify (vpage 91) Adding to the FAVORITE STATION button (vpage 95) Selecting the input source (vpage 53) Adjusting the master volume (vpage 54) AirPlay function (vpage 97) Turning off the sound temporarily (vpage 54) Convenience functions (vpage 100) Playing a DVD player/Blu-ray Disc player (vpage 54) Selecting a sound mode (vpage 108)
  • Page 53: Basic Operation

    Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER Press POWER X to turn on power to the unit. Input source • You can also switch the power to standby by pressing on the main unit. select buttons Selecting the input source VOLUME Press the input source select button to be played back.
  • Page 54: Adjusting The Master Volume

    Contents Connections Playback Settings Tips Appendix Adjusting the master volume Playing a DVD player/Blu-ray Disc player The following describes the procedure for playing DVD player/Blu-ray Disc Use VOLUME df to adjust the volume. player. • The variable range differs according to the input signal and channel level setting.
  • Page 55: Playing An Ipod

    Contents Connections Playback Settings Tips Appendix Playing an iPod • You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. • For information on the iPod models that can be played back with this unit, see “Supported iPod models”...
  • Page 56: Listening To Music On An Ipod

    • Depending on the type of iPod and the software version, some functions may not operate. • Note that Marantz will accept no responsibility whatsoever for any problems arising with the data on an iPod when using this unit in conjunction with the iPod.
  • Page 57: Setting Operation Mode (Ipod Browse Mode)

    Contents Connections Playback Settings Tips Appendix Setting operation mode (iPod Browse Use ui to select the file to be played, then press ENTER. Mode) Playback starts. Operation buttons Function In this mode, various lists and screens during playback on the iPod are displayed on the TV screen.
  • Page 58: Performing Repeat Playback (Repeat)

    Contents Connections Playback Settings Tips Appendix Performing repeat playback (Repeat) Performing random playback (Random) Press OPTION with “iPod Browse Mode” set to Press OPTION with “iPod Browse Mode” set to “On-Screen”. “On-Screen”. The option menu screen is displayed. The option menu screen is displayed. Use ui to select “Repeat”, then press ENTER.
  • Page 59: Playing A Usb Memory Device

    Contents Connections Playback Settings Tips Appendix Playing a USB memory device • Playing back music or viewing still picture (JPEG) files stored on a USB memory device. • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16”...
  • Page 60: Playing Files Stored On Usb Memory Devices

    OPTION NOTE • Note that Marantz will accept no responsibility whatsoever for any problems arising Use ui to select the file to be played, then press ENTER. with the data on a USB memory device when using this unit in conjunction with Playback starts.
  • Page 61 Contents Connections Playback Settings Tips Appendix 2 Operations available through the OPTION button • Performing repeat playback (Repeat) (vpage 101) • Performing random playback (Random) (vpage 101) • Searching content with keywords (Text Search) (vpage 103) • Playing back still images in sequential order (Slideshow Interval) (vpage 105) Front panel Display Rear panel...
  • Page 62: Listening To Fm/Am Broadcasts

    Contents Connections Playback Settings Tips Appendix Listening to FM/AM broadcasts For antenna connections, see “Connecting an FM/AM antenna” (vpage 44). TUNER CH/PAGE df OPTION uio p ENTER BACK TUNE +, – FAVORITE STATION 1 – 3 Front panel Display Rear panel Remote Index...
  • Page 63: Listening To Fm/Am Broadcasts

    Contents Connections Playback Settings Tips Appendix Listening to FM/AM broadcasts Use o p to select “FM” or “AM”, then press ENTER. FM : When listening to an FM broadcast. Press TUNER to switch the input source to “TUNER”. AM : When listening to an AM broadcast. Press TUNE + or TUNE –...
  • Page 64: Direct Tune

    Contents Connections Playback Settings Tips Appendix 2 Adding to the FAVORITE STATION button Tuning in by entering the radio (vpage 95) frequency (Direct Tune) 2 Operations available through the OPTION You can enter the receiving frequency directly to tune in. button Press OPTION.
  • Page 65: Changing The Tuning Mode (Tune Mode)

    Contents Connections Playback Settings Tips Appendix Changing the tuning mode (Tune Mode) Listening to preset stations You can change the mode for tuning into FM broadcasts. If you cannot Use CH/PAGE df to select the desired preset channel. tune in automatically with “Auto” mode, then change the mode to “Manual”...
  • Page 66: Preset Memory

    Contents Connections Playback Settings Tips Appendix Presetting the current broadcast station Channel Default settings 92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / (Preset Memory) 1 – 8 94.10 MHz 94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / Your favorite broadcast stations can be preset so that you can tune them 9 –...
  • Page 67: Preset Name

    Contents Connections Playback Settings Tips Appendix Tuning in to radio stations and Specify a name for the preset broadcast presetting them automatically station (Preset Name) (Auto Preset Memory) You can set the name to the preset broadcast station or change it. Up to eight characters can be input.
  • Page 68: Skipping Preset Broadcast Stations (Preset Skip)

    Contents Connections Playback Settings Tips Appendix Skipping preset broadcast stations n To set the stations you want to skip by (Preset Skip) stations q Use o p to select the group of broadcast stations You can set in advance, the stations you do not want to be displayed when you want to skip.
  • Page 69: Listening To Internet Radio

    Contents Connections Playback Settings Tips Appendix Listening to Internet Radio • Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. • The broad cast station types and specifications supported by this unit for playback are as follows.
  • Page 70: Listening To Internet Radio

    Contents Connections Playback Settings Tips Appendix Listening to Internet Radio Use ui to select the item you want to play, then press ENTER. Prepare for playback. • Check the network environment, then turn on this unit’s power (vpage 46 “Connecting to a home network (LAN)”). Internet Radio [1/7] Press NETWORK.
  • Page 71: Playing The Last Played Internet Radio Station

    Contents Connections Playback Settings Tips Appendix radiomarantz.com : • Displays Internet Radio stations added to favorites in vTuner. For • The display switches between track title and radio station name etc. each time instructions on how to add to favorites in vTuner, see “Using STATUS is pressed.
  • Page 72: Using Vtuner To Add Internet Radio Stations To Favorites

    Contents Connections Playback Settings Tips Appendix Using vTuner to add Internet Radio Select the search criteria (genre, region, language, etc.) stations to favorites of your choice. • You can also enter a keyword to search for a station you want to There are many Internet Radio stations in the world, and this unit can tune hear.
  • Page 73: Playing Back Files Stored On A Pc And Nas

    Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS • This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. • The network audio playback function of this unit connects to the server using technologies shown below.
  • Page 74: Applying Media Sharing Settings

    Start up Windows Media Player 12 on the PC. Select “Media Sharing” in the “Library”. Select “More streaming options...” in the “Stream”. Click the “Share my media” check box, select “SR6008”, Select “Allowed” in the drop-down list for “SR6008”. and then click “Allow”.
  • Page 75: Playing Back Files Stored On A Pc And Nas

    Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and Use ui to select the server including the file to be played, then press ENTER. Use ui to select the file, then press ENTER. Use this procedure to play music files, image files or playlists. Playback starts once buffering reaches “100%”.
  • Page 76 Contents Connections Playback Settings Tips Appendix 2 Operations available through the OPTION button • The display switches between track title, artist name, and album title each time STATUS is pressed. • Performing repeat playback (Repeat) (vpage 101) • When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album • Performing random playback (Random) (vpage 101) art data, the album art can be displayed while the music files are playing.
  • Page 77: Viewing Photographs On The Flickr Site

    Contents Connections Playback Settings Tips Appendix Viewing photographs on the Flickr site • Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr. To view photographs that you recorded yourself, you need an account in order to upload these photographs to the Flickr server.
  • Page 78: Viewing Photographs Shared By Particular Users

    Contents Connections Playback Settings Tips Appendix Viewing photographs shared by Use ui to select “Add Flickr Contact”, then press particular users ENTER. Prepare for playback. Flickr [1/2] • Check the network environment, then turn on this unit’s power (vpage 46 “Connecting to a home network (LAN)”). Add Flickr Contact All Content Press NETWORK.
  • Page 79: Viewing All Photographs On Flickr

    Contents Connections Playback Settings Tips Appendix Viewing all photographs on Flickr Use ui to select the folder, and then press ENTER. Favorites : Use ui to select “All Content”, then press ENTER. • Displays the favorite photographs of the specified user. Photostream : • Displays a list of shared photographs.
  • Page 80 Contents Connections Playback Settings Tips Appendix NOTE • Depending on the file format, some photographs may not be viewable. 2 Operations available through the OPTION button • Playing back still images in sequential order (Slideshow Interval) (vpage 105) • Displaying your desired video on the monitor during audio playback (Video Select) (vpage 105) • Adjusting the picture quality for your viewing environment (Picture Mode) (vpage 106)
  • Page 81: Listening To Pandora

    To listen to Pandora you will need a free Pandora account. If you do not have a Pandora account, you can create one at www.pandora.com or from the Pandora smartphone application. It is necessary to associate this machine with a Pandora account by visiting http://www.pandora.com/marantz from your PC. NETWORK CH/PAGE df OPTION...
  • Page 82: Listening To Pandora

    Pandora I have a Pandora account Use uio p to select “Pandora”, then press ENTER. I am new to Pandora Please go to http://www.pandora.com/marantz and follow the instructions there to create a new account. Network Your activation code is :...
  • Page 83: Creating A New Station

    Contents Connections Playback Settings Tips Appendix Creating a new station Input “Email address” and “Password”. You can create up to 100 radio stations. Pandora Account Use ui to select “New Station”, then press ENTER. Email address Password My Station [1/4] New Station Quick Mix Music1 Radio...
  • Page 84 Contents Connections Playback Settings Tips Appendix Use ui to select “Search by Artist” or “Search by Press ui, select a file (e.g. Music 2) from the list, and Track”, then press ENTER. press ENTER. You can search and display a list by track or artist. “Radio”...
  • Page 85: Listening To An Existing Station

    Contents Connections Playback Settings Tips Appendix Listening to an existing station Listening to created radio stations at random Use ui and select the radio station (“Music2 Radio”) that you want to listen to, and press ENTER. Use ui to select “Quick Mix”, then press ENTER. Created radio stations are selected at random, and tracks are streamed.
  • Page 86: Giving Feedback And Managing Stations

    Contents Connections Playback Settings Tips Appendix Giving Feedback and Managing Stations Bookmark this artist : • Bookmarks the artist currently being played. You can personalize your stations by providing feedback. • You can check on a computer or iPhone etc. • For details, see the Pandora web page. Press p while a track is playing.
  • Page 87: Sign Out

    Contents Connections Playback Settings Tips Appendix 2 Operations available through the OPTION Sign Out button Disassociate this unit from your Pandora account. • Displaying your desired video on the monitor during audio playback (Video Select) (vpage 105) Use ui to select “Sign Out”, then press ENTER. • Adjusting the picture quality for your viewing environment (Picture Mode) (vpage 106) • Playing music in All Zone Stereo (vpage 107)
  • Page 88: Listening To Siriusxm Internet Radio

    Contents Connections Playback Settings Tips Appendix Listening to SiriusXM Internet Radio Enjoy anywhere access to the unparalleled content of SiriusXM. Whether on your computer, smartphone, tablet, Lynx Portable Enjoy anywhere access to the unparalleled content of SiriusXM. Whether on your computer, smartphone, tablet, Lynx Portable Radio, or compatible Internet-connected device, you don’t need to be in your vehicle to enjoy SiriusXM.
  • Page 89 Contents Connections Playback Settings Tips Appendix Use uio p to select “SiriusXM”, then press ENTER. Input the “Username” and “Password”. SiriusXM Sign in Network Username zzzzz Favorites Internet Radio Password zzzzz Media Server Spotify Sign in Exit Enter BACK Select “Sign in”, then press ENTER. • For character input, see page 143.
  • Page 90: Sign Out

    Contents Connections Playback Settings Tips Appendix 2 Operations available through the OPTION Sign Out button Disassociate this unit from your SiriusXM account. • Displaying your desired video on the monitor during audio playback (Video Select) (vpage 105) Use ui to select “Sign Out”, then press ENTER. • Adjusting the picture quality for your viewing environment (Picture Mode) (vpage 106) When the popup menu appears, use o p to select “Yes”,...
  • Page 91: Listening To Spotify

    Settings Tips Appendix Listening to Spotify Introduce your Marantz to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.com Listening to Spotify Prepare for playback.
  • Page 92 GUpper case characters/Numbers/SymbolsH Spotify ABCDEFGHIJKLMNOPQRSTUVWXYZ ÄÀÁÂÃÅÆÇÐÈÉÊËÌÍÎÏÑÖÒÓÔÕØÜÙÚÛÝÞ Introduce your Marantz to a whole new world 0123456789 of music. With Spotify, you can enjoy instant access to millions of songs. ! “ # $ % & ’ ( ) z + , ; < = >...
  • Page 93 Contents Connections Playback Settings Tips Appendix After inputting the username and password, select “Log Use ui to select a station, and press ENTER to start In”, then press ENTER. playback. If the username and password match, the top menu for Spotify is Playback starts and the following screen appears.
  • Page 94 Contents Connections Playback Settings Tips Appendix Press p while a track is playing. The Spotify menu screen is displayed. • The display switches between track title, artist name, and album title each time STATUS is pressed. 2 Operations available through the OPTION Track-Artist [1/3] button...
  • Page 95: Adding To The Favorite Station Button

    Contents Connections Playback Settings Tips Appendix Adding to the FAVORITE STATION button With a single press of these, you can call up registered radio stations and contents You can add up to three types of content. Press and hold one of FAVORITE STATION 1 – 3 for 3 seconds or longer while playing back a content or listening to a radio station.
  • Page 96: Playing Back Content Added To The Favorite Station Button

    Contents Connections Playback Settings Tips Appendix Playing back content added to the FAVORITE STATION button You can easily call up content by pressing FAVORITE STATION. Press one of FAVORITE STATION 1 – 3 that you added content to. Playback starts. • Internet Radio stations are already registered to the FAVORITE STATION 1 –...
  • Page 97: Airplay Function

    Startup iPhone, iPod touch, or iPad music or iPod app. is displayed on the iPhone, iPod touch or iPad screen. Tap the AirPlay icon '. Select the speaker you want to use. Marantz SR6008 Cancel Front panel Display Rear panel...
  • Page 98: Playing Itunes Music With This Unit

    Launch iTunes and click the AirPlay icon ' displayed the window and select this unit from the list. My Computer Marantz SR6008 NOTE Choose a song and click play in iTunes. • In playback using the AirPlay function, the sound is output at the iPhone, iPod The music will stream to this unit.
  • Page 99: With The Remote Control Unit Of This Unit

    Contents Connections Playback Settings Tips Appendix Perform iTunes playback operations Devices Preferences with the remote control unit of this unit General Playback Sharing Store Parental Devices Advanced With this unit’s remote control unit, you can perform iTunes song play, Device backups: pause, and auto search (cue) operations.
  • Page 100: Convenience Functions

    Contents Connections Playback Settings Tips Appendix Convenience functions Here, we explain how to use the convenience functions. The source names under the titles of each function’s description are sources that allow use of these functions. NETWORK OPTION uio p ENTER Front panel Display Rear panel...
  • Page 101: Performing Random Playback (Random)

    Contents Connections Playback Settings Tips Appendix Performing repeat playback (Repeat) Performing random playback (Random) n Supported input sources : USB / Media Server / Spotify n Supported input sources : USB / Media Server / Spotify While content is playing, press OPTION. While content is playing, press OPTION.
  • Page 102: Add To Favorites From The Option Menu (Save To Favorites)

    Contents Connections Playback Settings Tips Appendix Add to favorites from the Option menu Playing back content added in “Save to (Save to Favorites) Favorites” You can add up to 100 items as favorites for Internet Radio and Media Press NETWORK. Server.
  • Page 103: Deleting Content Added To Favorites (Remove From Favorites)

    Contents Connections Playback Settings Tips Appendix Deleting content added to favorites Searching content with keywords (Remove from Favorites) (Text Search) Press NETWORK. n Supported input sources : USB / Internet Radio / Media Server While content is playing, press OPTION. Use uio p to select “Favorites”, then press ENTER.
  • Page 104 Contents Connections Playback Settings Tips Appendix Playing back music and a favorite picture at the same time (Slideshow) n Supported input sources : USB n Supported input sources : Internet Radio / Media Server Play back a still picture. Play back a still picture. • Playing back still pictures stored on USB memory devices • Playing back still pictures stored on Media Server (vpage 73).
  • Page 105 Contents Connections Playback Settings Tips Appendix Playing back still pictures in sequential Displaying your desired video during order (Slideshow Interval) audio playback (Video Select) You can play back still picture (JPEG) files stored on a USB memory device This unit can display video from a different source on TV during audio or Media Server and pictures on Flickr website as a slide show.
  • Page 106 Contents Connections Playback Settings Tips Appendix Adjusting the picture quality for your Use o p to select picture mode. viewing environment (Picture Mode) Off : No picture quality adjustment is done with this unit. Standard : The standard mode suited for most living room viewing environments.
  • Page 107: Playing Music In All Zone Stereo

    Contents Connections Playback Settings Tips Appendix 2 Stopping the All Zone Stereo function Playing music in All Zone Stereo During playback in All Zone Stereo, press OPTION. You can play back music in another room (ZONE2) simultaneously that is The option menu screen is displayed. played back in MAIN ZONE.
  • Page 108: Selecting A Sound Mode

    Contents Connections Playback Settings Tips Appendix Selecting a sound mode This unit allows you to enjoy various kinds of surround and stereo playback modes. Multi-channel audio formats are provided on popular movie and music disc formats such as Blu-ray and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet- based subscription services.
  • Page 109: Selecting A Sound Mode

    Contents Connections Playback Settings Tips Appendix 2 Switching the sound mode Selecting a sound mode • Press and hold MOVIE, MUSIC or GAME displays a list of the sound Press MOVIE, MUSIC or GAME to select a sound mode. modes that can be selected. Each time you press MOVIE, MUSIC or GAME, the sound mode changes.
  • Page 110: Direct Playback

    Contents Connections Playback Settings Tips Appendix Direct playback Pure Direct playback Sound recorded in source is played as is. This mode is for playback with higher sound quality than in “DIRECT” mode, by turning off the front panel display panel, which can eliminate Press PURE to select “DIRECT”.
  • Page 111: Auto Surround Playback

    Contents Connections Playback Settings Tips Appendix Auto surround playback This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Press PURE to select “AUTO”. Auto surround playback begins. • This can be set by pressing PURE DIRECT on the main unit. Front panel Display Rear panel...
  • Page 112 Contents Connections Playback Settings Tips Appendix 2 Description of sound mode types Dolby sound mode Sound mode type Description DOLBY PLgx This mode can be selected when the Dolby Pro Logic gx decoder is used to play back 2-channel sources in 6.1/7.1-channel surround sound including the surround back channel(s).
  • Page 113 Contents Connections Playback Settings Tips Appendix DTS sound mode Sound mode type Description DTS NEO:X This matrix decoding technology uses the DTS NEO:X decoder to playback 2-channel source or 5.1/6.1/7.1-channel surround sound including the surround back channel. There are 3 modes: “Music” suited for playing music, “Cinema” suited for playing movies, and “Game” which is optimized for playing games.
  • Page 114 Contents Connections Playback Settings Tips Appendix Audyssey DSX ® sound mode Sound mode type Description Audyssey DSX® This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front (A-DSX) wide or front height channels, the surround sound effects sound become more three dimensional and realistic. z This can be selected when a setting other than “None”...
  • Page 115 Contents Connections Playback Settings Tips Appendix Stereo sound mode Sound mode type Description STEREO This mode plays 2-channel stereo audio with no additional surround sound processing. • Sound is output from the front left and right speakers, and subwoofer if connected. • When multi-ichannel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surround sound processing.
  • Page 116: Sound Mode

    Contents Connections Playback Settings Tips Appendix 2 Sound mode • The following sound modes can be selected using the MOVIE, MUSIC, GAME, and PURE buttons. • Adjust the sound field effect with the menu “Surround Parameter” (vpage 145) to enjoy surround sound the way you like it. Sound mode Input signal Sound mode...
  • Page 117 Contents Connections Playback Settings Tips Appendix Sound mode Input signal Sound mode NOTE MOVIE MUSIC GAME Multi-channel z5 STEREO DOLBY DIGITAL DOLBY DIGITAL EX DOLBY DIGITAL + PLgx Movie DOLBY DIGITAL + PLgx Music Dolby Digital DOLBY DIGITAL + PLgz DOLBY DIGITAL A-DSX DOLBY DIGITAL + NEO:X Cinema DOLBY DIGITAL + NEO:X Music...
  • Page 118 Contents Connections Playback Settings Tips Appendix Sound mode Input signal Sound mode NOTE MOVIE MUSIC GAME DTS SURROUND DTS ES DSCRT 6.1 DTS ES MTRX 6.1 DTS 96/24 DTS + PLgx Movie DTS + PLgx Music DTS + PLgz DTS SURROUND A-DSX DTS + NEO:X Cinema DTS + NEO:X Music DTS + NEO:X Game...
  • Page 119 Contents Connections Playback Settings Tips Appendix Sound mode Input signal Sound mode NOTE MOVIE MUSIC GAME MULTI CH IN MULTI CH IN 7.1 MULTI IN + PLgx Movie MULTI IN + PLgx Music MULTI IN + PLgz PCM multi-channel MULTI CH IN A-DSX z3 z4 MULTI IN + DOLBY EX MULTI IN + NEO:X Cinema...
  • Page 120 Contents Connections Playback Settings Tips Appendix 2 Views on the display Shows a decoder to be used. • A DOLBY DIGITAL Plus decoder is displayed as “DOLBY D+”. Shows a decoder that creates sound output from the speakers. • “+ PLgz” indicates the front height sound from front height speakers. Front panel Display Rear panel...
  • Page 121: Hdmi Control Function

    Contents Connections Playback Settings Tips Appendix HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Not all HDMI-equipped devices have this capability. Setting procedure NOTE Set the HDMI output connector corresponding with the...
  • Page 122: Instaprevue Function

    Contents Connections Playback Settings Tips Appendix InstaPrevue function You can display sub screens on the main screen to preview playback video of the HDMI input connected to this unit. You can also display various MAIN video inputs in a single screen to switch input sources such as Blu-ray, DVD, and GAME while viewing them on sub screens.
  • Page 123: Switching Input Sources

    Contents Connections Playback Settings Tips Appendix Switching input sources Changing the display location of sub screens Switch to the desired input source on this unit while viewing sub screens. Press MAIN to switch the zone mode. You can change the display location of sub screens to a desired location. MAIN lights.
  • Page 124: Sleep Timer Function

    Contents Connections Playback Settings Tips Appendix Sleep timer function You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going MAIN to sleep. The sleep timer function can be set for each zone. SLEEP ZONE2 Using the sleep timer...
  • Page 125: Web Control Function

    “Always On”. Check the IP address of this unit with “Information” (vpage 179). Router This unit Network/Information Friendly name Marantz SR6008 DHCP IP Address 192.168.0.2 MAC Address 000678-000000 • This unit and the PC need to be connected to the network properly (vpage 46 Checking the IP address.
  • Page 126 Tools Help INDEX When the top menu is displayed, click on the menu item http://192.168.0.2/index.asp you want to operate. File Edit View Favorites Tools Help Marantz SR6008 INDEX Web Controller MAIN ZONE Marantz SR6008 Web Controller CBL/SAT MAIN ZONE ZONE2...
  • Page 127: Dual Backup Memory Function

    Contents Connections Playback Settings Tips Appendix Dual backup memory function The unit stores settings information in nonvolatile memory even when the Remembering set details (Backup) main power supply is turned off. Using the Dual Backup Memory function, you can write settings information to another memory area to back up Set the unit in the state you want remembering, and saved settings for recovery anytime as needed.
  • Page 128: Panel Lock Function

    Contents Connections Playback Settings Tips Appendix Panel lock function To prevent accidental operation of this unit, you can disable operation of Disabling all key button operations the buttons on the front panel. Press X while you press and hold DISPLAY and M-DAX PRESET CH + DISPLAY with the unit in standby mode.
  • Page 129: Canceling The Panel Lock Function

    Contents Connections Playback Settings Tips Appendix Canceling the Panel lock function Press X while you press and hold DISPLAY and M-DAX with the unit in standby mode. Press PRESET CH + or PRESET CH – to select “FP LOCK zOff”. (z The currently set mode.) Press STATUS to enter the setting.
  • Page 130: Remote Lock Function

    Contents Connections Playback Settings Tips Appendix Remote lock function When connecting an IR receiver, enable the Remote lock function. When Disabling the sensor function of the the function is enabled, you can not perform operations with the remote remote control unit control unit.
  • Page 131: Playback In Zone2 (Separate Room)

    Contents Connections Playback Settings Tips Appendix Playback in ZONE2 (Separate room) You can operate this unit to enjoy video and audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2.
  • Page 132 Contents Connections Playback Settings Tips Appendix 2 Connection 2 : Connection through the speaker 2 Connection 3 : Connection using an external output terminals amplifier • Set the “Assign Mode” (vpage  173) setting to “ZONE2”, and The audio signals of this unit’s ZONE2 audio output connectors are outputs ZONE2 audio from SURROUND BACK speaker terminals.
  • Page 133: Playback In Zone2

    Contents Connections Playback Settings Tips Appendix Playback in ZONE2 Press ZONE2 to switch the zone mode to the ZONE2. Press POWER X to turn on the ZONE2 power. POWER ZONE2 The ZONE2 power indicator on the display lights (vpage 15). • Also press input source select button when in standby mode, the power turns on.
  • Page 134: Turning Off The Sound Temporarily

    Contents Connections Playback Settings Tips Appendix 2 Turning off the sound temporarily Press MUTE The sound is reduced to the level set at “Mute Level” (vpage 184) in the menu. • To cancel, either adjust the volume or press MUTE again. • You can also adjust the volume level to cancel the muting. • You can adjust the tone and volume for ZONE2 in “ZONE2 Setup”...
  • Page 135: Menu Map

    Contents Connections Playback Settings Tips Appendix Settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. 2 Audio Setting items Description...
  • Page 136 Contents Connections Playback Settings Tips Appendix Setting items Description Page Tone Adjusts the tonal quality of the sound. Tone Control Set the tone control function to “On” and “Off”. Bass Adjust bass. Treble Adjust treble. M-DAX Expands the low and high frequency components of compressed audio content such as MP3 files to enable richer audio playback.
  • Page 137 Contents Connections Playback Settings Tips Appendix Setting items Description Page Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. Speaker Selection Select whether to adjust tones for individual speakers or for all speakers. Adjust EQ Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”. Curve Copy Copy “Audyssey Flat”curve from MultEQ®...
  • Page 138 Contents Connections Playback Settings Tips Appendix Setting items Description Page Output Settings Makes screen-related settings. Video Mode Make settings for video processing. Video Conversion The input video signal is converted automatically in conjunction with the connected TV. i/p Scaler Convert the input source resolution to the resolution set. Resolution Set the output resolution.
  • Page 139 The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. Settings Make settings for wired LAN. Diagnostics Used to check the network connection. Maintenance Mode Use when receiving maintenance from a Marantz service engineer or custom installer. Front panel Display Rear panel Remote Index...
  • Page 140 Contents Connections Playback Settings Tips Appendix 2 General Setting items Description Page Language Sets the language for display the menu on the TV screen. ZONE2 Setup Makes settings for audio playback in a ZONE2 system. Bass Adjust bass tones. Treble Adjust treble tones.
  • Page 141 Displays system information. Notifications Selects notification message preferences. Usage Data Selects whether or not to send anonymous usage data to Marantz. Firmware Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Update Update the firmware of the receiver.
  • Page 142: Menu Operation

    Contents Connections Playback Settings Tips Appendix Menu operation Press MAIN to switch the zone mode. MAIN MAIN lights. Press SETUP. The menu is displayed on the TV screen. Use uio p to select the menu to be set or operated, then press ENTER.
  • Page 143: Inputting Characters

    Contents Connections Playback Settings Tips Appendix Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search (vpage 103) • Preset Name (vpage 67) • Source Rename (vpage 162) • Friendly Name (vpage 179) • Zone Rename (vpage 185) • Character input for the network functions (vpage 70, 77, 81, 88, 91, 180) Keyboard screen Display the screen for inputting characters.
  • Page 144: Audio

    Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Dialog Level Subwoofer Level Sets the output level to clarify the dialogue output from the center channel. This setting adjusts the volume level for the subwoofer. 2 Level 2 Subwoofer Turn subwoofer output on and off.
  • Page 145: Surround Parameter

    Contents Connections Playback Settings Tips Appendix 2 Loudness Management Surround Parameter This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic range of audio You can adjust the surround audio sound field effects to match your preferences.
  • Page 146 Contents Connections Playback Settings Tips Appendix 2 Low Frequency Effects 2 Panorama Adjust the low-frequency effects level (LFE). Assign front L/R signals to also go to the surround channels for wider sound. n When “Input Mode” is set other than to “7.1CH IN” On : Set.
  • Page 147: Center Width

    Contents Connections Playback Settings Tips Appendix 2 Center Width 2 Speaker Select Distributes the dialogue output from the center channel to left and right Makes setting for the speakers outputting sound. channels and widens the sound image in the front. Surround Back : Sound is output from the surround back speakers.
  • Page 148: Tone

    Contents Connections Playback Settings Tips Appendix Tone M-DAX Adjust the tonal quality of the sound. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal 2 Tone Control components that are hard for the human ear to hear. The “M-DAX” Set the tone control function to “On”...
  • Page 149: Audio Delay

    Contents Connections Playback Settings Tips Appendix 2 Limit Audio Delay Make a setting for maximum volume. While viewing video, manually adjust the time to delay audio output so 60 (–20dB) / 70 (–10dB) / 80 (0dB) that the video and audio are synchronized. Off (Default) 0ms (Default) –...
  • Page 150: Audyssey

    Contents Connections Playback Settings Tips Appendix 2 Dynamic EQ Audyssey Solves the problem of deteriorating sound quality as volume is Set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey decreased by taking into account human perception and room Dynamic Volume®. These can be selected after Audyssey® Setup has been acoustics.
  • Page 151: Dynamic Volume

    Contents Connections Playback Settings Tips Appendix 2 Reference Level Offset 2 Dynamic Volume Audyssey Dynamic EQ® is referenced to the standard film mix level. It Solves the problem of large variations in volume level between TV, makes adjustments to maintain the reference response and surround movies and other content (between quiet passages and loud passages, envelopment when the volume is turned down from 0 dB.
  • Page 152: Audyssey Dsx

    Contents Connections Playback Settings Tips Appendix 2 Audyssey DSX ® 2 Stage Width Provides more immersive surround sound by adding the new channels. Adjust sound stage width when using front wide speakers. On : Turns on Audyssey DSX® processing for wide or height expansion. –10 –...
  • Page 153: Graphic Eq

    Contents Connections Playback Settings Tips Appendix 2 Curve Copy Graphic EQ Copy “Audyssey Flat” curve from “MultEQ® XT” (vpage 150). Use the 9 band graphic equalizer to adjust the tone of each speaker. • “Curve Copy” is displayed after Audyssey® Setup has been performed. • “Graphic EQ”...
  • Page 154: Video

    Contents Connections Playback Settings Tips Appendix Video Make video-related settings. Picture Adjust • You can also press OPTION to make these settings from “Picture Mode” Picture quality can be adjusted. (vpage 106) in the option menu. • The default settings are as follows. • For “NETWORK”...
  • Page 155: Hdmi Setup

    Contents Connections Playback Settings Tips Appendix 2 Noise Reduction HDMI Setup Reduce overall video noise. Make settings for HDMI video/audio output. Low / Medium / High / Off (Default) NOTE 2 Enhancer • When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power.
  • Page 156: Hdmi Control

    Contents Connections Playback Settings Tips Appendix 2 HDMI Pass Through 2 Pass Through Source Selects how the AV receiver will pass HDMI signals to the HDMI The AV receiver will “pass through” the sources HDMI signal when output in standby power mode. in standby.
  • Page 157: Video Conversion

    Contents Connections Playback Settings Tips Appendix 2 i/p Scaler Output Settings Convert the input source resolution to the resolution set. Makes screen-related settings. n When the input source is set other than to “iPod/USB” and “NETWORK” • Can be set when each input source is assigned “HDMI”, “COMP” or “VIDEO” Analog (Default) : Use i/p (interlace-to-progressive) scaler function for (vpage 161).
  • Page 158: Progressive Mode

    Contents Connections Playback Settings Tips Appendix 2 Resolution 2 Progressive Mode Set the output resolution. Set an appropriate progressive conversion mode for the source video You can set “Resolution” separately for HDMI output of the analog signal. video input and HDMI input. Auto (Default) : The video signal is automatically detected and the Auto (Default) : The number of pixels the TV connected to the HDMI appropriate mode is set.
  • Page 159: On Screen Display

    Contents Connections Playback Settings Tips Appendix On Screen Display TV Format Select the on-screen display user interface preferences. Set the video signal format to be output for the TV you are using. 2 Volume 2 Format Sets where to display the master volume level. NTSC (Default) : Select NTSC output.
  • Page 160: Inputs

    Contents Connections Playback Settings Tips Appendix Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign • By default, each item is set as follows. By making connections as indicated by the input sources printed on the Input source HDMI...
  • Page 161 Contents Connections Playback Settings Tips Appendix 2 HDMI 2 COMP (Component video) Set this to change the HDMI input connectors assigned to the input Set this to change the component video input connectors assigned to sources. the input sources. 1 / 2 / 3 / 4 / 5 / 6 / FRONT : 1 / 2 : Assign the component video input connector to the selected Assign an HDMI input connector to the selected input source.
  • Page 162: Source Rename

    Contents Connections Playback Settings Tips Appendix Source Rename Hide Sources Change the display name of the selected input source. Remove from the display input sources that are not used. This is convenient when the input source name of your device and the Show (Default) : Use this source.
  • Page 163: Input Select

    Contents Connections Playback Settings Tips Appendix 2 Decode Mode Input Select Set the audio decode mode for input source. Set the audio input mode and decode mode of each input source. Auto (Default) : Detect type of digital input signal and decode and play The input modes available for selection may vary depending on the input automatically.
  • Page 164: Audyssey ® Setup

    Contents Connections Playback Settings Tips Appendix Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Setup”. You do not have to perform Audyssey® Setup when you have already performed Speaker Calibration in Setup Assistant. To set up the speakers manually, use “Manual Setup”...
  • Page 165 Contents Connections Playback Settings Tips Appendix 2 About Setup and measurement microphone 2 About the main listening position (*M) placement The main listening position is the position where listeners would normally sit or where one would normally sit alone within the listening • Measurements are performed by placing the Setup and measurement environment.
  • Page 166: Procedure For Speaker Settings (Audyssey ® Setup)

    Contents Connections Playback Settings Tips Appendix Procedure for speaker settings Mount the Setup and measurement microphone on a (Audyssey ® Setup) tripod or stand and place it in the main listening position. When you set the setup microphone, point the tip of it toward the ceiling, at the height of your ears in your listening position.
  • Page 167 Contents Connections Playback Settings Tips Appendix Connect the Setup and measurement microphone to Select “Start” and then press ENTER. the SETUP MIC jack of this unit. Audyssey® Setup can also make the following settings. • Amp Assign The signal output from the SURROUND BACK and FRONT HEIGHT/WIDE speaker terminals of this unit can be switched to match your speaker environment.
  • Page 168 Contents Connections Playback Settings Tips Appendix The detected speakers are displayed. Move the Setup and measurement microphone to position 2, select “Continue”, and then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. Audyssey Setup Speaker Detection Front...
  • Page 169 Contents Connections Playback Settings Tips Appendix Repeat step 9, measuring positions 3 to 8. Use ui to select the item you want to check, and then press ENTER. Select “Calculation” and then press ENTER. Audyssey Setup Check processing results. To proceed, press “Store”. Audyssey Setup Calibration completed! Now calculating...Please wait.
  • Page 170 Contents Connections Playback Settings Tips Appendix Set Audyssey Dynamic Volume ® . Select “Store” and then press ENTER. Save the measurement results. Audyssey Setup Audyssey Setup You can set Dynamic Volume function, which automatically Check processing results. To proceed, press “Store”. adjust volume level for all content.
  • Page 171: Error Messages

    Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details Measures...
  • Page 172: Retrieving Audyssey ® Setup Settings

    Contents Connections Playback Settings Tips Appendix Retrieving Audyssey ® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey® Setup measurement result (value calculated at the start by MultEQ® XT) even when you have changed each setting manually. Audyssey Setup Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included...
  • Page 173: Manual Setup

    Contents Connections Playback Settings Tips Appendix Manual Setup Amp Assign Perform when setting the speakers manually or when changing settings Select power amplifier usage method to match your speaker system. made in Audyssey® Setup. 2 Assign Mode • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ®...
  • Page 174: Speaker Config

    Contents Connections Playback Settings Tips Appendix 2 Subwoofer Speaker Config. Set the presence of a subwoofer. Indicate speaker presence and select speaker size categories based on Yes (Default) : Use a subwoofer. bass reproduction capability. No : Select when a subwoofer is not connected. 2 Front 2 Surround Set the front speaker size.
  • Page 175 Contents Connections Playback Settings Tips Appendix 2 Surr. Back 2 Front Height Set the presence, size and number of surround back speakers. Set the presence and size of the front height speakers. Large : Use a large speaker that can adequately play back very low Large : Use a large speaker that can adequately play back very low bass frequencies.
  • Page 176: Distances

    Contents Connections Playback Settings Tips Appendix Distances Levels Set distance from listening position to speakers. Set the volume of the test tone to be the same when it is output from Measure beforehand the distance from the listening position to each each speaker.
  • Page 177: Crossovers

    Contents Connections Playback Settings Tips Appendix 2 Set the crossover frequency Crossovers 40Hz / 60Hz / 80Hz (Default) / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / Set the maximum frequency of the bass signal output from each channel to 200Hz / 250Hz the subwoofer.
  • Page 178: Bass

    Contents Connections Playback Settings Tips Appendix Bass Front Speaker Set subwoofer and LFE signal range playback. Set the front speakers to use. 2 Subwoofer Mode • This can be set when “Assign Mode” (vpage 173) is set to “Front B”. Select low range signals to be reproduced by subwoofer. LFE (Default) : The low range signal of the channel set to “Small”...
  • Page 179: Network

    Friendly Name / DHCP On or Off / IP Address / MAC Address 2 Edit Name Edits Friendly Name. • MAC Address is required to make a vTuner account. • The default Friendly Name on first use is “Marantz SR6008”. IP Control • Up to 63 characters can be input. • For character input, see page 143.
  • Page 180: Settings

    Contents Connections Playback Settings Tips Appendix 2 IP Address Settings Set the IP address within the ranges shown below. Make settings for wired LAN. • The Network Audio function cannot be used if other IP addresses • If you are using a broadband router (DHCP function), there is no need are set.
  • Page 181: Diagnostics

    Contents Connections Playback Settings Tips Appendix 2 Proxy Diagnostics Make this setting when connecting to the Internet via a proxy server. Used to check the network connection. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your 2 Physical Connection provider, etc.
  • Page 182: Maintenance Mode

    Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service technician or custom installation professional. NOTE • Only use this function if so instructed by a Marantz serviceperson or installer. Front panel Display...
  • Page 183: General

    Contents Connections Playback Settings Tips Appendix General Make various other settings. Language ZONE2 Setup Set the language for display on the menu screen. Set the audio to play back with multi-zone (ZONE2). English (Default) / Français / Español • The setting values (dB) for “Volume Limit” and “Power On Volume” are what is displayed when “Scale”...
  • Page 184: Volume Level

    Contents Connections Playback Settings Tips Appendix 2 Lch Level 2 Volume Level Adjust the left channel output level. Set the volume output level. –12dB – +12dB (Default : 0dB) Variable (Default) : Volume adjustment is enabled by main unit and remote control unit.
  • Page 185: Zone Rename

    Contents Connections Playback Settings Tips Appendix Zone Rename Trigger Out Change the display title of each zone to one you prefer. Selects when to activate trigger out. For details about how to connect the DC OUT jacks, see “DC OUT jack” MAIN ZONE / ZONE2 (vpage 50).
  • Page 186: Auto Standby

    Contents Connections Playback Settings Tips Appendix Auto Standby Information When you do not perform any operation on this unit with no audio or video Show information about receiver settings, input signals, etc. input for a specified time, this unit automatically enters the standby mode. 2 Audio Before it enters the standby mode, “Auto Standby”...
  • Page 187: Hdmi Monitor

    Version : Displays information for the current firmware. 2 Notifications Selects notification message preferences. Notification Alerts On (Default) : Displays notification messages from Marantz in the popup menu. Off : Does not display notification messages from Marantz in the popup menu. Front panel Display Rear panel Remote...
  • Page 188: Usage Data

    Yes : Provide Marantz with information about how you use this unit via the network. Check for Update : Check for firmware updates. You can also check No : Do not provide Marantz with information about how you use this unit approximately how long it will take to complete via the network.
  • Page 189 Upgrade On (Default) : Display upgrade message. • See the Marantz website for details about upgrades. • When the procedure is complete, “Registered” is displayed in this menu and Off : Do not display upgrade message. upgrades can be carried out. If the procedure has not been carried out, “Not Registered”...
  • Page 190: Setup Lock

    If the error continues despite this, check the network environment. • Information regarding the “Update” function and “Add New Feature” will be announced on the Marantz web site each time related plans are defined. Front panel Display...
  • Page 191: With The Remote Control Unit

    Contents Connections Playback Settings Tips Appendix Specifying the zone used with the remote control unit When ZONE2 is pressed, only the MAIN ZONE can be operated with the remote control unit. This is useful for preventing mistaken operation. ZONE2 Press and hold ZONE2 and SETUP. MAIN and ZONE2 button blink.
  • Page 192: Contents

    Contents Connections Playback Settings Tips Appendix Tips Contents 2 Tips ..............(193) 2 Troubleshooting ..........(195) I want the volume not to become too loud by mistake ....(193) Power does not turn on/Power is turned off ........(195) I want to keep the volume at the same level when I turn the Operations cannot be performed through the power on ..................(193) remote control unit .................(196)
  • Page 193: Tips

    Contents Connections Playback Settings Tips Appendix Tips I want the volume not to become too loud by mistake. • Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
  • Page 194 Contents Connections Playback Settings Tips Appendix I want to combine a desired video with the current music. • Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from Set-top Box or DVD, etc. while listening to music from Tuner, CD, PHONO, M-XPort or the Internet radio (vpage 105).
  • Page 195 • Turn down the volume and turn on the power again. 53, 54 • This unit’s amplifier circuit has failed. Turn off the power and please contact the Marantz – service adviser. Front panel...
  • Page 196: Operations Cannot Be Performed Through The Remote Control Unit

    Contents Connections Playback Settings Tips Appendix 2 Operations cannot be performed through the remote control unit Symptom Cause/Solution Page Operations cannot be performed • Batteries are worn out. Replace with new batteries. through the remote control unit. • Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°.
  • Page 197: No Sound Comes Out

    Contents Connections Playback Settings Tips Appendix 2 No sound comes out Symptom Cause/Solution Page No sound comes out of speakers. • Check the connections for all devices. 25, 33, 34, 35, 37, 38, 39, 40, 41, 42, 44, 46, • Insert connection cables all the way in. – • Check that input connectors and output connectors are not reversely connected. –...
  • Page 198: Desired Sound Does Not Come Out

    Contents Connections Playback Settings Tips Appendix 2 Desired sound does not come out Symptom Cause/Solution Page The volume does not increase. • The maximum volume is set too low. Set the maximum volume using “Limit”on the menu. 149, 184 • Appropriate volume correction processing is performed according to the input audio format –...
  • Page 199 Contents Connections Playback Settings Tips Appendix Symptom Cause/Solution Page DTS sound is not output. • Check that the digital audio output setting on the connected device is set to “DTS”. – • Set “Decode Mode” on the menu to “Auto” or “DTS”. Dolby TrueHD, DTS-HD, Dolby Digital • Make HDMI connections.
  • Page 200: Sound Is Interrupted Or Noise Occurs

    Contents Connections Playback Settings Tips Appendix Symptom Cause/Solution Page No audio is output from PRE OUT or • In ZONE2, the audio can be played back when signals input from digital terminals (OPTICAL/ – speakers for ZONE2. COAXIAL) are in 2ch PCM format. • In ZONE2, the audio can be played back when signals input from the HDMI terminal are in 2ch PCM format.
  • Page 201: No Video Is Shown On The Tv

    Contents Connections Playback Settings Tips Appendix 2 No video is shown on the TV Symptom Cause/Solution Page No picture appears. • Check the connections for all devices. 33, 34, 37, 38, 39, 42, 44, 46 • Insert connection cables all the way in. – • Check that input connectors and output connectors are not reversely connected. –...
  • Page 202: The Menu Screen Is Not Displayed On The Tv

    Contents Connections Playback Settings Tips Appendix 2 The menu screen is not displayed on the TV Symptom Cause/Solution Page The menu screen or status • The menu screen is only displayed on this unit and a TV connected by HDMI cable. If this unit –...
  • Page 203: Ipod Cannot Be Played Back

    Contents Connections Playback Settings Tips Appendix 2 iPod cannot be played back Symptom Cause/Solution Page iPod cannot be connected. • When using iPod by connecting it to the USB port, some iPod variations are not supported. • When iPod is connected by using a USB cable other than the genuine cable, iPod may not be –...
  • Page 204: Usb Memory Devices Cannot Be Played Back

    Contents Connections Playback Settings Tips Appendix 2 USB memory devices cannot be played back Symptom Cause/Solution Page “No Connection” is displayed. • The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. • USB memory devices of a mass storage class or those compatible with MTP are supported. –...
  • Page 205: The Internet Radio Cannot Be Played Back

    Contents Connections Playback Settings Tips Appendix 2 File names on the iPod/USB memory device are not displayed properly Symptom Cause/Solution Page The file names are not displayed • Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters –...
  • Page 206: Music Files On Pc Or Nas Cannot Be Played Back

    Contents Connections Playback Settings Tips Appendix 2 Music files on PC or NAS cannot be played back Symptom Cause/Solution Page Files stored on a computer cannot be • Files are stored in a non-compatible format. Record in a compatible format. played. • You are attempting to play a file that is copyright protected.
  • Page 207: The Hdmi Control Function Does Not Work

    Contents Connections Playback Settings Tips Appendix 2 The HDMI control function does not work Symptom Cause/Solution Page The HDMI control function does not • Check that “HDMI Control” in the menu is set to “On”. work. • You cannot operate devices that are not compatible with the HDMI control function. In addition, depending on the connected device or the settings, the HDMI control function may not work.
  • Page 208: Resetting Factory Settings

    Contents Connections Playback Settings Tips Appendix Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Note that when you perform this operation, various settings are reset to their default values and setup will need to be performed again. ZONE2 SOURCE Turn off the power using X.
  • Page 209: About Hdmi

    Contents Connections Playback Settings Tips Appendix Appendix About HDMI • 3D This unit supports input and output of 3D (3 dimensional) video signals of HDMI. HDMI is an abbreviation of High-Definition Multimedia Interface, which is To play back 3D video, you need a TV and player that provide support for an AV digital interface that can be connected to a TV or amplifier.
  • Page 210 Contents Connections Playback Settings Tips Appendix • HDMI control • ARC (Audio Return Channel) If you connect the unit and an HDMI control function compatible TV or This function transmits audio signals from the TV to this unit through the player with an HDMI cable and then enable the HDMI control function HDMI cable and plays back the audio from the TV on this unit based on setting on each device, the devices will be able to control each other.
  • Page 211 Contents Connections Playback Settings Tips Appendix 2 Supported audio formats Copyright protection system 2-channel, 32 kHz – 192 kHz, In order to play back digital video and audio such as BD-Video (Blu-ray 2-channel Linear PCM 16/20/24 bit Disc) or DVD-Video via HDMI connection, both this unit and TV and the 7.1-channel, 32 kHz –...
  • Page 212: Video Conversion Function

    Contents Connections Playback Settings Tips Appendix Video conversion function This unit automatically converts the input video signals as shown in the diagram below before outputting them to the TV. This unit HDMI-compatible TV Video device Input Output Output (IN) (MONITOR OUT) Input HDMI signal HDMI signal...
  • Page 213 Contents Connections Playback Settings Tips Appendix This unit can convert the input video signals to the resolution that is set for “Resolution” (vpage 158) in the menu before outputting them to the TV. Output signal HDMI 480i/576i 480p/576p 720p 1080i 1080p 1080p 24Hz 4K 30/25/24Hz Input signal...
  • Page 214: Playing Back Usb Memory Devices

    Contents Connections Playback Settings Tips Appendix Playing back USB memory devices z1 Copyright-protected files can be played on certain portable players compatible with MTP. z2 Only files that are not protected by copyright can be played on this unit. • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. Content downloaded from pay sites on the Internet are copyright protected.
  • Page 215: Playing Back Files Stored On Pc Or Nas

    Contents Connections Playback Settings Tips Appendix Playing back files stored on PC or 2 Specifications of supported files Sampling frequency Bit rate Extension • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. (Windows 32/44.1/48 kHz 48 – 192 kbps .wma Media Audio) • This unit can show the artwork that was embedded by using MP3 ID3- Tag Ver. 2.3 or 2.4.
  • Page 216: Playing Back Internet Radio

    Contents Connections Playback Settings Tips Appendix Playing back Internet Radio Personal memory plus function This function sets the settings (input mode, sound mode, HDMI output 2 Playable broadcast station specifications mode, MultEQ® XT, Dynamic EQ, audio delay etc.) last selected for the Sampling frequency Bit rate Extension...
  • Page 217: Sound Modes And Channel Output

    Contents Connections Playback Settings Tips Appendix Sound modes and channel output S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” (vpage 174). Channel output Sound mode (vpage 108) Front L/R...
  • Page 218: Sound Modes And Surround Parameters

    Contents Connections Playback Settings Tips Appendix Sound modes and surround parameters Surround Parameter (vpage 145) Loudness Dynamic Low Frequency Height Gain Sound mode (vpage 108) Dialog Level Subwoofer Level Home Theater EQ Management Compression Effects (vpage 144) (vpage 144) (vpage 145) (vpage 147) (vpage 145) (vpage 145) (vpage 146) DIRECT/PURE DIRECT (2-channel)z5 DIRECT/PURE DIRECT (Multi-channel)z5 DSD DIRECT (2-channel)z5...
  • Page 219 Contents Connections Playback Settings Tips Appendix Surround Parameter (vpage 145) Audyssey (vpage 150) NEO:X mode PRO LOGIC g/gx Music mode only Tone M-DAX only Sound mode (vpage 108) Dynamic MultEQ® XT Dynamic EQ Audyssey (vpage  1 48) (vpage  1 48) Panorama Dimension Center Width Center Gain Volume DSX®...
  • Page 220 Contents Connections Playback Settings Tips Appendix z1 This item can be selected when a Dolby TrueHD signal is played. z2 This item can be selected when a Dolby Digital or DTS signal is played. z3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z4 This setting is available when the set sound mode name contains “+PLgz”.
  • Page 221: Types Of Input Signals, And Corresponding Sound Modes

    Contents Connections Playback Settings Tips Appendix Types of input signals, and corresponding sound modes F This indicates the default sound mode. S This indicates the selectable sound mode. 2-channel signal Multi-channel signal Dolby Digital DTS ES DTS ES DOLBY DOLBY Sound mode (vpage 108) NOTE Analog /...
  • Page 222 Contents Connections Playback Settings Tips Appendix 2-channel signal Multi-channel signal Dolby Digital DTS ES DTS ES DOLBY DOLBY Sound mode (vpage 108) NOTE Analog / (Super DOLBY DOLBY (Super (+/HD) / DTS-HD DSCRT MTRIX DIGITAL DIGITAL Audio Multi Express TrueHD DIGITAL Audio Plus (-HD)
  • Page 223 Contents Connections Playback Settings Tips Appendix z1 This item can be selected when surround back speakers are used. z2 The Movie mode or Music mode can be selected. When using a single surround back speaker, the Music mode is used. z3 This item can be selected when front height speakers are used.
  • Page 224: Explanation Of Terms

    Contents Connections Playback Settings Tips Appendix Explanation of terms Audyssey Dynamic Surround Expansion (A-DSX) Audyssey DSX® is a scalable system that adds new speakers to improve surround sound vividness. Starting with a 5.1 system Audyssey DSX® first adds Wide channels for A2DP the biggest impact on envelopment.
  • Page 225 Contents Connections Playback Settings Tips Appendix Dolby Digital Plus Dolby Digital Plus is an improved Dolby Digital signal format that is Bluetooth compatible with up to 7.1-channels of discrete digital sound and also Bluetooth is a short-distance wireless communication technology used for improves sound quality thanks to extra data bit rate performance.
  • Page 226 Contents Connections Playback Settings Tips Appendix Dolby Pro Logic gz Dolby TrueHD Dolby Pro Logic gz introduces a new dimension to Home Entertainment Dolby TrueHD is a high definition audio technology developed by Dolby through the addition of a pair of front height channels. Compatible with Laboratories, using lossless coding technology to faithfully reproduce the sound of the studio master.
  • Page 227 Contents Connections Playback Settings Tips Appendix DTS Digital Surround DTS-HD High Resolution Audio DTS Digital Surround is the standard digital surround format of DTS, DTS-HD High Resolution Audio is an improved version of the conventional Inc., compatible with a sampling frequency of 44.1 or 48 kHz and up to DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling 5.1-channels of digital discrete surround sound.
  • Page 228 Contents Connections Playback Settings Tips Appendix THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, FLAC INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF FLAC stands for Free lossless Audio Codec, and is a lossless free audio MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE file format.
  • Page 229 Contents Connections Playback Settings Tips Appendix Pairing This is an abbreviation of Low Frequency Effect, which is an output channel Pairing is an operation required for settings to connect two Bluetooth that emphasizes low frequency effect sound. Surround audio is intensified devices.
  • Page 230: Vtuner

    Contents Connections Playback Settings Tips Appendix Windows Media Player Ver.11 or later This is a media player distributed free of charge by Microsoft Corporation. vTuner It can play playlists created with Ver.11 or later of Windows Media Player, This is a free online content server for Internet Radio. Note that usage fees as well as WMA, DRM WMA, WAV, and other files.
  • Page 231: Trademark Information

    Contents Connections Playback Settings Tips Appendix Trademark information Manufactured under a license from U.S. Patent No’s: 5,956,674; 5,974,380; 5,978,762; 6,487,535; 6,226,616; 7,212,872; 7,272,567; 7,668,723; 7,392,195; 7,930,184; 7,333,929; 7,548,853; 7,003,467 and Manufactured under license from Audyssey Laboratories™. U.S. and 7,283,634. DTS, the Symbol, and DTS and the Symbol together are foreign patents pending.
  • Page 232 Contents Connections Playback Settings Tips Appendix Adobe, the Adobe logo and Reader are either registered trademarks or “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, trademarks of Adobe Systems Incorporated in the United States and/or respectively, and has been certified by the developer to meet Apple other countries.
  • Page 233: Specifications

    Contents Connections Playback Settings Tips Appendix Specifications 2 Audio section • Power amplifier Rated output: Front: 110 W + 110 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 150 W + 150 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 110 W (8 Ω/ohms, 20 Hz –...
  • Page 234: Video Section

    Contents Connections Playback Settings Tips Appendix • Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format —...
  • Page 235: Tuner Section

    Contents Connections Playback Settings Tips Appendix 2 Tuner section [FM] [AM] –15 (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 Receiving Range: 87.5 MHz – 107.9 MHz 520 kHz – 1710 kHz Usable Sensitivity: 1.2 μV (12.8 dBf) 18 μV 50 dB Quieting Sensitivity: MONO...
  • Page 236: Index

    Contents Connections Playback Settings Tips Appendix Index Dolby Dolby Digital ·············································· 112, 225 Cables ···································································· 21 Dolby Digital EX ········································· 112, 225 Connection v Numerics Dolby Digital Plus ······································ 112, 225 7.1CH IN ······························································ 41 Dolby Pro Logic II ······································ 112, 225 3D ········································································...
  • Page 237: Playback Settings

    Contents Connections Playback Settings Tips Appendix HDCP ··························································· 211, 228 Network settings·················································· 179 Random ·························································· 58, 101 HDMI control················································ 121, 156 Rear panel ······························································ 16 Headphones ··························································· 12 Remote control unit ··············································· 19 Inserting the batteries ··········································· 8 Pairing ···························································· 48, 229 Remote lock function ···········································...
  • Page 238 Contents Connections Playback Settings Tips Appendix Tips ······································································ 193 Troubleshooting ··················································· 195 Tuner operation menu Auto Preset Memory ··········································· 67 Direct Tune ·························································· 64 Preset Memory ··················································· 66 Preset Name ······················································· 67 Preset Skip ·························································· 68 Tune Mode ·························································· 65 Turning off the sound temporarily ··························...
  • Page 239: License

    Contents Connections Playback Settings Tips Appendix License n Expat n FastDelegate http://www.jclark.com/xml/expat.html http://www.codeproject.com/KB/cpp/FastDelegate. aspx This section describes software license used for Expat License. Copyright (c) 1998, 1999, 2000 Thai this unit. To maintain the correct content, the Open Source Software Center Ltd THE WORK (AS DEFINED BELOW) IS PROVIDED original (English) is used.
  • Page 240 Contents Connections Playback Settings Tips Appendix g. “Standard Version” refers to such a Work if it has not e. The Articles discussing the Work published in e. You may distribute the Executable Files and Source been modified, or has been modified in accordance any form by the author may not be distributed or Code only under the terms of this License, and You with the consent of the Author, such consent being...
  • Page 241 Contents Connections Playback Settings Tips Appendix 6. Representations, Warranties and Disclaimer. THIS 9. Termination. 11. Miscellaneous WORK IS PROVIDED “AS IS”, “WHERE IS” AND a. This License and the rights granted hereunder will a. This License shall be governed by the laws of the “AS AVAILABLE”, WITHOUT ANY EXPRESS terminate automatically upon any breach by You location of the head office of the Author or if the...
  • Page 242 Contents Connections Playback Settings Tips Appendix • Redistributions in binary form must reproduce the • Redistributions of source code must retain the Redistribution and use in source and binary forms, with or without modification, are permitted provided that the above copyright notice, this list of conditions and above copyright notice, this list of conditions and the following conditions are met: the following disclaimer in the documentation and/or...
  • Page 243 Contents Connections Playback Settings Tips Appendix n Tremor THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT 2. Redistributions in binary form must reproduce the HOLDERS AND CONTRIBUTORS “AS IS” AND ANY above copyright notice, this list of conditions and http://wiki.xiph.org/index.php/Tremor EXPRESS OR IMPLIED WARRANTIES, INCLUDING, the following disclaimer in the documentation and/ BUT NOT LIMITED TO, THE IMPLIED WARRANTIES or other materials provided with the distribution.
  • Page 244 Contents Connections Playback Settings Tips Appendix n zlib n cURL n c-ares http://www.zlib.net/ http://curl.haxx.se http://c-ares.haxx.se zlib.h -- interface of the ‘zlib’ general purpose COPYRIGHT AND PERMISSION NOTICE Copyright 1998 by the Massachusetts Institute of compression library version 1.2.3, July 18th, 2005 Technology.
  • Page 245 GPL/ LGPL software that is used in the product. Marantz provides the source code based on the GPL and LPGL licenses at the actual cost upon your request to our customer service center. However, note that we make no guarantees concerning the source code.
  • Page 246 Contents Connections Playback Settings Tips Appendix 2 Dimensions Unit : in. (mm) 17 21/64 (440.0) 2 11/64 (55.0) 1 31/32 1 31/32 2 Weight : 24 lbs 11 oz (11.2 kg) (50.0) 13 25/64 (340.0) (50.0) Front panel Display Rear panel Remote Index...
  • Page 247 D&M Holdings Inc. 3520 10232 00AM...

Table of Contents

Save PDF