Marantz SR6006 Getting Started page 133

Setting items
GUI Master Volume : Display the master volume during adjustment.
(Continued) • Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is
"iPod/USB".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Tuner : Set the tuner screen display time when the input source is
"HD Radio".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Zone Rename • Up to 10 characters can be input.
Change the display title of • For character input, see page 90.
each zone to one you prefer.
BD
Setting details
118
Setting items
n When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
Trigger Out 1 /
Trigger Out 2
Trigger out is activated through linkage to the power of the zone set
Select the condition for
to "ON".
activating Trigger Out 1/2 for
n When setting for input source
the input source, surround
Activate trigger out when the input source set to "ON" is selected.
mode, etc.
See "Connecting the DC Active for the zone set to "ON" with "When setting for zone".
OUT (TRIGGER OUT) jacks"
n When setting for surround mode
(vpage 72) for more
Activate trigger out when the surround mode set to "ON" is selected.
information on trigger out.
Active when the "MAIN ZONE" set to "ON" with "When setting
for zone" is selected, and when the input source set to "ON" with
"When setting for input source" is selected.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to "ON" is selected.
Activate trigger out when the HDMI monitor set to "ON" is
selected. Active when the "MAIN ZONE" set to "ON" with
"When setting for zone" is selected, and when the input source
set to "ON" with "When setting for input source" is selected.
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
Display ON : Display is always on.
Set the display on/off Auto OFF : Display is off except when showing the status display.
setting. OFF : Display is always off.
• This can also be set by pressing
DISP
Each time
ON
DISPLAY
• If on the main unit is pressed, the
same function as with the remote control unit
can be obtained.
SYSTEM SETUP
Setting details
DISP
.
is pressed, the setting is changed as shown below.
Auto Off
OFF
vSee overleaf