Speaker Connection - Marantz M-CR511 Owner's Manual

Contents Connections

Speaker connection

Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
NOTE
0 Disconnect this unit's power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0 Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. ("Protection circuit" (v p. 116))
0 Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock.
0 Use speakers with an impedance of 4 – 16 Ω/ohms.
Front/Top
Rear panel
panel
Playback Settings
Connecting the speaker cables
Connect the speaker cable to the + speaker terminal (red) and the -
speaker terminal (black).
1
2
3
4
Remote control 18
unit
Tips
Peel off about 10 mm of sheathing from the tip of the
speaker cable, then twist the core wire tightly.
Turn the speaker terminal counterclockwise to loosen
it.
Insert the speaker cable's core wire to the hilt into the
speaker terminal.
Turn the speaker terminal clockwise to tighten it.
Index
Appendix