HighSecLabs K404F User Manual page 25

Moving Between Windows in Normal Mode
When in normal mode moving between windows can be done either
by switching to system mode (by pressing the mouse side buttons),
pointing at the new window and switching back to normal mode (by
pressing the mouse side buttons again). Another option is to use the
front panel push buttons.
Dragging a Window
In order to move a window user should first switch to system mode
by pressing + or – mouse side buttons. In system mode, hold the left
mouse button when the system cursor located on the desired
window and the window will move. Release left mouse button to
drop window in place.
Notes: Window movement to the left side is limited by the display
boundary.
Window movement to the right side is unlimited (window may be
pushed out of the display viewable area).
Window Resizing
In order to resize a window the user should first switch to system
mode by pressing + or – mouse side buttons. In system mode, the
user should drag the mouse while holding the right mouse button
when the system cursor located on the bottom right corner of the
desired window. Release right mouse button to freeze window size.
Note: Window size is limited by the size set for the window under the
channel menu.
Window Internal Scroll
When window size is smaller than input image size it might be
required to "move" the image inside the window. This is done by
pointing at the window, pressing both mouse buttons at the same
time and moving the mouse. Release the mouse buttons to freeze
the position of the window.
25
Secure Combiner KVM Switch User Manual
Help button
The "?" button located at the task bar (see figure below) show mouse
functionality bitmap with mouse functions.
Maximizing a window to full screen mode
To maximize a window to its full size – enter System Mode by pressing
+ or – mouse side buttons then bring the system cursor to the
window that should be maximized and then double click on that
window.
The selected window will maximize to its native input resolution. No
other windows or bars will be displayed.
To leave maximize mode – change back to system mode (by pressing
the mouse side buttons) and re arrange windows as needed.
Changing to system mode will
Deactivating / activating channels
The user can remove from the Secure Combiner KVM display inactive
channels. In order to deactivate a channel the user should enter
system mode and then move the system cursor to the desired
channel button at the task bar and double-click on it. Red X should
appear on that channel (see figure below).
In some cases the user may want to deactivate a live channel for
operational reasons. The Secure Combiner KVM will display instead
on that channel a background color.
Repeating this process will cancel this status and reactivate that
channel.
Once a channel had been deactivated it would not participate in
cyclic toggling between windows and will not be displayed in anyway.