HighSecLabs K404F User Manual page 20

Secure Combiner KVM Switch User Manual
4. Check that each window is coupled to the proper audio output (if
applicable).
5. Check that all video cable thumb screws are secured.
6. Check that administrator key was removed from the device.
Dual Display Channel #1 Input resolution setting window
Installation is similar to a single display with the following changes:
1. Displays must be either 1920 x 1080 or 1920 x 1200 native
resolution. Do not use higher resolution as the image will be shown
as a smaller window or will be rescaled (resulting a degradation in the
displayed video quality.
2. It is recommended that both displays will be identical type and
model.
3. Displays should be oriented in landscape.
4. Left side display must be connected to the primary console display
output jack (the right side jack when looking from the rear).
5. Conversion to VGA monitor is not recommended.
20