Status Led - NETGEAR Arlo Q User Manual

4. Click or tap Time Zone.
The Time Zone page displays.
5. Click or tap a time zone.
6. Click or tap Done.
If you are using a mobile device, your settings are saved.
7. If you are using a computer, click Save.
Your settings are saved.

Status LED

The status LED on the Arlo Q lights in different colors. You can turn off the status
LED. The Arlo Q status LED is color coded.
Turn Off the Status Light
¾ To turn off the status light:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
The Cameras page displays.
Settings
Solid amber Solid blue
The camera is The camera is
booting. powered on and is
connected to Arlo
servers.
Slow blinking
Slow blinking
amber blue
The camera is
The camera is
connecting to a
powered on and is
WiFi network.
ready for setup.
Fast blinking Fast blinking
amber blue
The camera is
The camera is not
connected to a connecting to Arlo
WiFi network yet. servers.
on your mobile device.
arlo.netgear.com
46
Solid purple
The camera is
connected to a WiFi
network. However, it
is not connected to
the Internet.
Blinking purple
The camera is too
far away from the
router.
Blinking blue/
amber
A firmware update
is in progress. DO
NOT TURN OFF THE
CAMERA.
Off
The camera is
powered off.
in the address bar of a