Change Motion Sensitivity - NETGEAR Arlo Q User Manual

2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the Arlo Q camera.
The Mode page displays.
4. Click or tap a mode to activate it.
The mode that you selected turns on immediately. The mode stays active until
you change it.
When you view the Cameras page, the icons that display at the top of the camera
feed are based on the currently selected mode.
Motion. Motion detection is on.
Sound. Audio detection is on.

Change Motion Sensitivity

You can easily change the sensitivity level for Arlo Q cameras.
¾ To change the sensitivity level for a camera:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the Arlo Q camera.
The Mode page displays.
4. Click or tap Edit
The Edit Rule page displays.
Modes, Rules, and Smart Alerts
on your mobile device.
arlo.netgear.com
next to the mode.
34
in the address bar of a