2-Way Data Port And Smart Phone Data Port - CrimeStopper PS01-G5 Operating Instructions Manual

Some vehicles require a Databus Module to Bypass the factory Immobilizer and operate the keyless entry
Databus modules are used to communicate with the vehicles computer at the OBD2 Data connector or Canbus
wires. This reduces installation error. Crimestopper Systems with DP Series have a direct Data Port Plug-In for
the Databus bypass module. This eliminates conventional wiring between the Alarm/Remote Starter and the
bypass interface module.
Features Include
• Transponder Immobilizer.
• PassLock Immobilizer.
O.E.M. Alarm Control.
•
• R.A.P. Shutdown.
• Power Door Locks.
• Priority Unlock.
• Trunk Release.
Sliding Doors.
•
• Parking Lights.
• Courtesy Lights.
• Tachometer.
• Heated Seats.
• Rear Defrost.
• Driver 1 and 2 Memory presets.
The actual features controlled depend on the vehicle and Databus module.
This unit includes a Smart Phone Data Port. This is the white 4 pin plug on side of module, see page 25 for location.
This is "Direct Data to Data" Plug-In for the MS3 Smart Phone interface module. No other wiring is required. The
MS3 is purchased separately. This is an APP based system for a smart phone with the same functions as a normal
remote control.
2-Way DATA PORT
SMART PHONE DATA PORT
20