Technical Data - Zanussi ZTE7100PZ User Manual

The display shows Err
The display shows (e.g. E51)
1) After maximum 5 hours, the programme ends automatically
2) only dryers with the display.
If the drying results are not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• There was too much laundry in the
appliance.

Technical Data

Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Necessary fuse
Total power
Energy efficiency class
1)
Energy consumption
Annual energy consumption
Left—on mode power absorption
Off mode power absorption
Type of use
Permitted ambient temperature
www.zanussi.com
Problem
2)
.
2)
.
2)
Possible solution
If you want to set a new programme, deactivate
and activate the appliance.
Make sure that the options are applicable to the
programme.
Deactivate and activate the appliance. Start a new
programme. If the problem occurs again, contact
the Service.
• The drum is dirty.
• Incorrect setting of the conductivity sensor.
• The airflow slots are clogged.
850 x 600 x 600 mm (maximal 630 mm)
1090 mm
950 mm
850 mm (+ 15 mm - feet regulation)
108 l
7 kg
230 V
50 Hz
16 A
2600 W
C
4,25 kWh
512 kWh
0,70 W
0,70 W
Household
+ 5°C to + 35°C
25