Technical Data; Machine Settings - Zanussi ZTH 485 User Manual

Hide thumbs Also See for ZTH 485:
Table of Contents

Advertisement

Particularly high room temperature - no ma-
chine fault.
1) In case of error message on the LCD (e.g. E51- only dryers with the LCD): Switch the dryer off and on. Set
programme. Press the START/PAUSE button. Does not work? - inform local service and quote the error
code.
2) follow program recommendation - see Programme overview chapter
3) see Care and cleaningchapter
4) see Machine settings chapter
5) only dryers with the LCD
6) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section).

Technical data

Dimensions (mm)
Max. depth
(with the appliance door open)
Max. width
(with the appliance door open)
Electrical connection
Drum volume
Weight of the appliance
Laundry: max. weight
Type of use
Ambient temperature
1)
Energy consumption
Annual energy consumption
Energy efficiency class
Power consumption
1) With reference to EN 61121. 7 kg of cotton and a spin speed at 1000 rpm.
2) Energy consumption per year in kWh, based on 160 drying cycles of the standard cotton programme at full
and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will
depend on how the appliance is used (REGULATION (EU) No 392/2012).

Machine settings

Setting
14
Width / Height / Depth
Voltage
Frequency
Fuse
Total power
Min.
Max.
kWh/cycle
2)
Left-on mode
Off-mode
Lower the room temperature if possible.
85 x 60 x 58 cm
1090 mm
950 mm
230 -240 V
50 Hz
13 A
1050 W
108 l
52 kg
7 kg
Household
5 °C
35 °C
2,04 kWh
251 kWh
A+
0,68 W
0,68 W
Implementation
www.zanussi.com

Advertisement

Table of Contents
loading

Table of Contents