Before Your Start; Table 3-1 Application Scenario Of Each Configuration Method - Huawei HG8240 Service Manual

3 Configuration

3.1 Before Your Start

This section provides common methods for configuring ONT services.
Methods for configuring ONT services include configuring services by using the OLT
commands, U2000, Web interface, TR-069 server and by issuing XML configuration file.
3-1

Table 3-1 Application scenario of each configuration method

Configurati
on Method
OLT
commands
U2000
Web
interface
TR-069
server
Issuing XML
configuration
file
Table 3-2
3-2
shows the application scenario of each configuration method.
Application Scenario
This method uses the OMCI protocol to configure ONT services. It can be
used to add ONTs, configure ONT port attributes and port VLANs, and to
enable the Layer 2 service channels between the OLT and ONTs. It can
implement all configurations for Layer 2 services such as the Layer 2 Internet
access service and the Layer 2 multicast service. In the case of configuring
Layer 3 services such as the WAN port, ONT voice service, and Wi-Fi
service, coordination of one or more other methods is required.
This method can be used to configure Layer 2 services for the ONT by using
the OMCI protocol, and to configure ONT value-added service profile and
customized parameters. Customized parameters can be configured after batch
adding general configurations to facilitate configuration efficiency. This
method is recommended in batch service provisionings.
This method uses Web interface of the ONT to configure related ONT
parameters. In this method, batch configuration is not supported, and the
coordination of OLT commands or the U2000 is required. It is simple and is
generally used in the deployment.
All the configurable nodes of the ONT are defined on the TR-069 server. The
TR-069 server supports real-time configuration and status query. In this
method, the coordination of OLT commands or the U2000 is required.
The ONT voice service and gateway involve a large amount of configuration
information, most of which is not defined in the OMCI protocol and cannot
be configured on Web interface or the U2000. This method functions as a
supplement to Web interface and the U2000. In this method, the coordination
of OLT commands or the U2000 is required. This method is not recommended
because it is complex.
lists configuration methods supported in the FTTH service.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Table
Issue 04 (2011-01-12)