Table 5-14 Parameters Used For Configuring A Voip Interface Based On The Sip Protocol - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Issue 04 (2011-01-12)

Table 5-14 Parameters used for configuring a VoIP interface based on the SIP protocol

Parameter
Primary Server
Proxy Server Address
Proxy Server Port
Secondary Server
Proxy Server Address
Proxy Server Port
General
Home Domain
Local Port
Digitmap
Digitmap Match Mode
Registration Period
Signaling Port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the IP address (provided by the ISP) of the primary
SIP proxy server.
Indicates the ID (provided by the ISP) of the port used for
communication between the primary SIP proxy server and
the VoIP terminal. The ID ranges from 1 to 65535 and the
default ID is 5060.
Indicates the IP address (provided by the ISP) of the
secondary SIP proxy server.
Indicates the ID (provided by the ISP) of the port used for
communication between the secondary SIP proxy server and
the VoIP terminal. The ID ranges from 1 to 65535 and the
default ID is 5060.
Indicates the domain of the registration server of the VoIP
terminal in network communications, such as
softx3000.huawei.com.
Indicates the ID of the local port on the ONT. The ID ranges
from 1 to 65535 and the default ID is 5060.
Indicates the voice digitmap.
Indicates the digitmap matching mode, including Min and
Max.
l Min: If the dialed character string matches a digitmap
scheme, the system immediately reports the number to
the call proxy.
l Max: If the dialed character string matches a digitmap
scheme, the system does not immediately report the
number to the call proxy but starts the short timer. If a
user does not continue dialing digits, the system reports
the number to the call proxy after the short timer times
out; if the user continues dialing digits and the number
matches the long digitmap, the system reports the number
that matches the digitmap to the call proxy.
Indicates the valid registration period. When this period
expires, the SIP user needs to register again. The value range
is 1s to 65534s, and the default value is 600s.
Indicates the signaling WAN port used for connecting the
VoIP terminal to the SIP server.
5 Web Page Reference
5-33