Configuring The Internet Access Service On The Web Page - Huawei HG8240 Service Manual

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual

3.4.4 Configuring the Internet Access Service on the Web Page

This topic provides an example of how to configure the Internet access service on the Web page.
Prerequisite
l
l
l
Context
The Internet access service includes the Layer 2 Internet access service and Layer 3 Internal
access service.
l
l
You do not need to configure the Layer 2 Internet access service on the ONT, but you need to
only enable the Layer 2 service channels between the OLT and ONT. This topic describes only
how to configure the Layer 3 Internet access service.
Procedure
Step 1 Configure the working mode of a LAN port.
1.
2.
Step 2 Configure parameters of a WAN port.
1.
2.
Issue 04 (2011-01-12)
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see
and a GPON ONT (on the OLT
You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see
Locally Logging in to the Web
The user-side PC must be connected with the LAN port of an ONT by using network cables.
Layer 2 Internet access service: The PPPoE dialup is performed on the PC. The IP address
is allocated by the upper-layer BRAS. The ONT is connected to the OLT and then to the
upper-layer network in the Layer 2 mode to provide the high-speed Internet access service.
Layer 3 Internet access service: The PPPoE auto dialup is performed on the ONT. The IP
address is allocated by the DHCP IP address pool on the ONT. The ONT is connected to
the OLT and then to the upper-layer network in the Layer 3 mode to provide the high-speed
Internet access service.
In the navigation tree, choose LAN > LAN Port Work Mode. Select the check box of
LAN 1 and set LAN1 to work in the Layer 3 mode.
Click Apply to apply the configuration.
In the navigation tree, choose WAN > WAN Configuration.
In the right pane, click New. In the dialog box that is displayed, configure parameters of a
WAN port as follows:
l WAN Connection: Enable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3.4.1.1 Enabling Layer 2 Service Channels Between an OLT
CLI).
Interface.
3 Configuration
3.4.3
3-185