Huawei HG8240 Service Manual page 135

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Issue 04 (2011-01-12)
NOTE
l If LAN Port two three-port enable is disable, the LAN port works in the Layer 2
mode.
l If LAN Port two three-port enable is enable, the LAN port works in the Layer 3
mode.
LAN Port two three-port enable is defaulted to disable.
(5) Configure parameters of a WAN port.
a. In the navigation tree, choose WAN Device > WAN Device 1 > WAN
Connection. Select WAN Connection, right-click, and choose Add IP
Connection from the shortcut menu.
b. Select WAN IP Interface 1 and enter (or select) a proper value.
– WAN Interface Name: ONT-IPTV
– WAN Enable: enable
– Connection Type: IP_Bridged
– VLAN ID: 30 (The VLAN ID of the ONT must be the same as the user-
side VLAN ID configured on the OLT.)
– Priority: 4
– MultiCast VLAN ID: 1000 (The multicast VLAN ID of the ONT must
be the same as the multicast VLAN ID configured on the OLT.)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
3-97