Huawei HG8240 Service Manual page 103

EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
Issue 04 (2011-01-12)
a. In the navigation tree, choose Services > Voice Service > Voice Service
1 > Interface configuration > Interface 1 > User. Select User, right-click,
and choose Add from the shortcut menu.
NOTE
A maximum of two users can be configured on the HG8240/HG8245/HG8247.
b. Click User 1 below User and set Interface ID to 1. Click User 2 below
User and set Interface ID to 2.
NOTE
If Interface ID is 1, port TEL1 on the ONT is bound. If Interface ID is 2, port TEL2
on the ONT is bound.
(8) Click OK to complete the configuration of the new profile.
4. Bind the value-added service profile.
(1) In the Physical Map navigation tree on the Main Topology tab page, double-
click the target OLT, or select the target OLT, right-click, and choose NE
Explorer.
(2) In the navigation tree, choose GPON > GPON ONU.
(3) On the GPON ONU tab page, set the search criteria to find the GPON ONU
records.
(4) Select an ONT from the list, right-click, and choose Bind VAS Profile from the
shortcut menu. In the dialog box that is displayed, choose the created profile, and
click OK to complete profile binding.
5. Configure ONT value-added services.
(1) On the GPON ONU tab page, select an ONT, right-click, and choose Configure
Value-Added Service from the shortcut menu.
(2) Configure parameters of the SIP-based voice users.
NOTE
The parameters of the SIP-based voice user must be consistent with the corresponding
configuration on the softswitch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
3-65