Ricoh mpc1500sp Operating Instructions Manual page 106

Hide thumbs Also See for mpc1500sp:

Table of Contents

Various Scan Settings

Note

❒ If [Custom Size] is selected, the dimensions of the scan area (width and

length) can be specified in mm.

Relationship of Original of Mixed Sizes and Scan Size

This section explains differences you need to be aware of when scanning origi-

nals of the same width but different length (such as A3&A4 or B4&B5) using the

original position setting and size.

• If you set [Mixed Sizes] to [On], the machine detects the length of same width

originals and scans them. For details about Mixed Sizes, see "Mixed Size

Mode".

• If a template size is selected, the machine scans originals at the selected size

regardless of the actual size of originals. If an original is smaller than the se-

lected size, the machine applies margins to the scan area.

• If [Auto Detect] is selected for scanning originals from the exposure glass, the

machine detects the size of individual originals and scans accordingly.

• If [Auto Detect] is selected for scanning originals from the ADF, the machine

detects the size of the largest original and scans all the other originals based

on that size.

Reference

p.101 "Mixed Size Mode"

Specifying Custom Size

This section explains how to specify a custom size.

To scan a custom size original, measure its width and length, and enter these fig-

ures as the "Width" and "Length" settings.

The following figure shows the "Width" and "Length" of an original.

❖ Placing an original in the ADF

Vertical

Horizontal

ALO031S

Table of Contents