Chapter 5
Add Borders allows you to add one or more predefined borders to the displayed
image. To add a border:
1.
Use
2.
Use
–
Soft Edge—Applies a soft, vignetted frame to the image.
–
Oval—Adds an oval matte border with beveled edges.
–
Rectangle—Adds a rectangular matte border with sharp corners.
3.
Press
Follow the on-camera instructions to adjust the border.
4.
Press
Design Gallery Menu. Press
return to the Add Borders sub-menu.
Cropping images
Crop allows you to crop the displayed image to the selected orientation, then use
the Zoom lever and
Tip
1.
Use
2.
Use
–
Landscape (Default)—Horizontally crops the displayed image to a 3:2 aspect
ratio (one third wider than tall).
–
Portrait—Vertically crops the displayed image to a 2:3 aspect ratio (one-third
taller than wide).
Follow the on-camera instructions to use the Zoom lever and adjust what appears
in the cropped image.
When you print, the normal aspect ratios get cropped on the top and bottom
(landscape) or on the sides (portrait). Cropping helps ensure that the content you
want gets printed.
3.
Press
Menu. Press
Crop sub-menu.
24
to select
Add Borders, then press
to select a border type and preview the effect it has on the image.
to select the border and display the Creative sub-menu.
to save a copy of the image with the specified border and return to the
to ensure that the image content you want gets saved.
Make sure you crop images as needed before adding borders.
to select
Crop, then press
to select a crop orientation and preview the effect it has on the image.
to save a copy of the cropped image and return to the Design Gallery
to exit the Creative sub-menu without saving and return to the
.
to exit the Creative sub-menu without saving and
.