Transferring Images Without Hp Photosmart Software; Connecting To The Computer; Using A Memory Card Reader - HP Photosmart M437 User Manual

Chapter 6

Transferring images without HP Photosmart Software

If you do not install the HP Photosmart Software:
● You cannot use the Share features or Buy Prints Online on the camera's
Photosmart Express Menu (see
● Images marked for printing do not automatically print when the camera is connected
to the computer.
● Favorites tags do not transfer to the computer.
However, you can still transfer images and video clips to your computer by:
● Connecting your camera directly to the computer (see
on page
● Using a memory card reader (see

Connecting to the computer

1. Turn off the camera, connect the camera and computer using the USB cable that
came with your camera, then turn on the camera. Your computer's provided image
transfer software should start. Follow the on-screen instructions to transfer your
images.
2. When you have finished transferring images, disconnect the camera from the
computer. If you get an Unsafe Removal warning, disregard the warning.
If you encounter problems, set the camera's USB Configuration to Disk Drive (see
USB Configuration under
reconnect to your computer.
Note
Image Capture nor iPhoto starts automatically, look on the desktop for a disk drive
icon with the label HP_M537 or HP_M437 and copy the images manually. For
more information about how to copy files, visit Mac help.

Using a memory card reader

You can put your camera's optional memory card into a (separately purchased) memory
card reader. Some computers and HP Photosmart printers have built-in memory card
slots which act as a memory card reader.
For Windows computers:
1. Insert your camera's memory card into the memory card reader (or into your
computer's memory card slot).
2. Right-click My Computer on your desktop, then select Explore.
3. Expand the removable drive folder, expand the DCIM folder, then click on the folder
for your camera.
4. Select and copy all the images to a folder on your computer.
5. After verifying that the images were successfully transferred, return the memory card
to your camera.
For Macintosh computers:
1. Insert your camera's memory card into the memory card reader (or into your
computer's memory card slot).
2. Either Image Capture or iPhoto starts automatically and guides you through the
process of transferring images.
26
26)
Using the Camera Setup Menu on page
On Macintosh computers, if you set the camera to Disk Drive and neither
Using HP Photosmart Express on page
Connecting to the computer
Using a memory card reader on page
29).
26)
33) and