Using The Burst Setting - HP Photosmart M437 User Manual

Chapter 3

Using the Burst setting

Burst allows you to take up to three pictures as quickly as possible when you press and
hold the Shutter button all the way down.
1.
While in the Picture Capture Menu, use
highlight On, press
2. Frame the subject, then press the Shutter button halfway down to lock the focus
and exposure. Then press the Shutter button all the way down and hold it. The
camera takes up to three pictures as quickly as possible until you release the
Shutter button or the camera runs out of memory.
The Image Display remains off during the burst capture. After the burst images have
been taken, each image appears one at a time in Instant Review (see
on page 11). You can delete the entire burst sequence in Instant Review. To delete
individual images, see
The Burst setting remains in effect until it is changed again, or until you turn off the
camera.
18
, then hold down
Deleting images on page
to highlight Burst , press
until the menu disappears.
20.
,
Instant Review