Priming The Smoke Unit - Lionel M10000 O Gauge Streamline Operator's Manual

Priming the Smoke Unit

When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack (shown below). We recommend M.T.H. ProtoSmoke fluid. Do not
overfill the unit or the fluid may leak out and coat the interior engine components.
If you choose not to add smoke fluid (or have already added fluid but choose to
run smoke-free), turn off the smoke unit by turning the smoke unit control fully
counter clockwise. Failure either to add fluid to the smoke unit or to turn it
off may damage the smoke unit heating element and/or wicking material.
Add Smoke
Adding Smoke Fluid
Smoke Unit Control
Lionel Corportion M10000 O Gauge Streamline Train w/Proto-Sound®2.0
Running the engine without a primed
smoke unit may cause damage
Smoke Unit Control
4